FL350 Rev Limit Mod

The question...
I have a FL350 and i need to know how to by-pass the rev limiter.
any ideas would be a help 
Rich.



The Reply

Hi
Wile it can be done I really don't recommend doing it for several reasons
For example on the rear of the Odyssey you will see at the top of the 
transmission a sensor with 2 wires coming out of it if you cut both wires 
twist them together then ground them this will allow you to start your FL350 
in gear and it will no longer sputter when you are backing up, this creates

2 very dangerous conditions 1 you now can make your FL350 go about as 
fast in reverse as it will go forward. 2 You can start the FL350 when your
in gear and standing along side of the FL350 and possibly run your self 
over :-)



Now if your talking about the rev limiter that limits the the RPM of the motor
contact Triple E ----> 1-800-763-3762 http://www.expresspages.com/t/triplee/
Sara's E-mail address at Triple E... smorrisk@yahoo.com they should have a 
modified CDI box that will let your motor rev more on the top end.



hoser..