This has probably been posted before but I don't know which thread.
Here is a list of wheels off other machines that fit the oddy's.
You still need to check offsets but wheel and stud patterns are the same.

TRX 200 90-93 & 96-97 (F) 21x7x10 10×5 4×110
TRX 250 Big Red 86-87 (F) 21x7x10 10×5 4×110
TRX 250X 86-87 (F) 22x7x10 10×5 4×110
YFB 250 Timberwolf 2x4, 95-98 (F) 22x7x10 10x5 4x110
Bear Tracker 250 99-09 (F) 22x7x10 10x5 4x110
Bruin 250 05 (F) 22x7x10 10x5 4x110

LT 250R QuadRacer 85-86 (R) 22x11x10 10x8 4/130

Odyssey 85 Front 21x7x10 10×5 4×110 Rear 24x11x10 10×8 4×130
Pilot 89-90 Front 21x7x10 10×5 4×110 Rear 24x11x10 10×8 4×130

If I am wrong chime in and correct me.

Thank you for the post. I'm recovering from surgery and attempting to document all the crossover parts that will fit our machines. After trying to record all the scattered info I'll be working on a spreadsheet that breaks down all my info recovered and categorizes it. I will repost the final collections here on the tech page when it's finished for everyone to have. Thanks for your input.
Kevin

Hope you make a speedy recovery brother! Thank you for the time you are putting into the spreadsheet as well! Me being a novice Pilot owner, it will be a very useful tool.