I created this tool to assist in removing the rear brake disc mount on my Pilot. Fortunately I had an old brake disc laying around so I just welded a piece of angle iron to it. The idea here is, once you have both axles out, you mount this tool to the disc mount and you gently drive the disc mount off of the final shaft by beating (gently) on it from the right side through the final shaft.

I'm hoping that this will work better than the 3 or 4 jaw puller technique of removing the disc mount. I had a bitch of a time on my other Pilot using a puller. I'll post pics of the tool in action when I get around to doing the job.

Thanks to Hare and Hoser for the tip...

PNut