Hi there
Can anyone help me out with some sizes of there jets thay are running in there pilots
I have got a power pipe / 38mm makuni flat slide carby / delta force reeds / and a K&N filter / CDI (Capacitor Discharge Ignition) with no rev limiter. The carby came with a 05 pilot jet 082 main jet when i rev it flat in nutral i dies at high revs like it is starving for something (air/fuel). Just some sizes i can start with i know every pilot is diferant but a close start would be nice.
Thanks Shane

I don't have much experience with the Mikuni carbs but 82 sounds lean, where did
you buy the carb they should be able to provide you with a base line jetting info
to start from, this should be discussed before you buy a carb because buying
jets after you get it will just add to the price of the carb, I learned this the hard
way then had to buy 30.00 in jets to dial it in.