wyeeoddy wrote:
I thought you were the info Guru
see item 2
oh here it is
Remove stem with crescent wrench or 11/.16" open-end wrench (when looking
down on stem, turn counter-clockwise to remove). This stem Was Loctited during
assembly; iF stem is too tight to remove otherwise, Fixed face may be placed between
two blocks of soft wood in a vise
see attach pic
Wyeeoddy
"I thought you were the info Guru" ------ that sounds like a shot
Anyways thanks for the info. Your right. I actually have that pdf and never read that. It's actually a problem that I have -- I read stuff to fast and then don't totally comprehend what I just read. When I tried to take mine apart I thought it was possibly a left hand thread. It's real tight and I did heat it up, but never got it off, so just left it alone. It's good enough.