| PilotOdyssey.com http://www.pilotodyssey.com/PO/ |
|
| Water pump wiring http://www.pilotodyssey.com/PO/viewtopic.php?f=1&t=17878 |
Page 1 of 1 |
| Author: | mcali2 [ Tue Feb 06, 2018 4:57 pm ] |
| Post subject: | Water pump wiring |
I want to wire in the water pump to come on when the Engine is started or when the key is on. How have others done this? I don't want to add a switch as my son will forget I'm sure. I have a relay. I could tie into the keyed power up front but rather find a wire in back. Out side of testing every wire is there a known wire I can get? |
|
| Author: | canadian oddy [ Tue Feb 06, 2018 7:21 pm ] | ||
| Post subject: | Re: Water pump wiring | ||
I personally like a separate wire because I don't want to potentially melt down a wire because of an over load. You must also make sure you fuse it with a 5 amp fuse (if you are using the bosch pump). Below is a color wiring diagram if you want to find a wire to tap into.
|
|||
| Author: | CurtisR401 [ Tue Feb 06, 2018 8:56 pm ] |
| Post subject: | Re: Water pump wiring |
You can use the black at the rectifier by looking at that diagram. It has a 15 amp fuse in it but you can add one on the wire you install. This is if you want to use the ignition to start the pump. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|
