PilotOdyssey.com
http://www.pilotodyssey.com/PO/

Fl350 prefilter system
http://www.pilotodyssey.com/PO/viewtopic.php?f=100&t=11973		 Page 1 of 1
Author:  shoubadaba [ Tue Apr 09, 2013 3:11 am ]
Post subject:  Fl350 prefilter system
What up guys. I have been wanting to do a prefilter system on my sons fl350 and still retain the stock box and snorkle. I like things on my machines to work fantastic and look bitchen. So this is what I have come up with. Im adding a second stock outlet to the opposite side of the lower airbox to try and look factory. These will have clamp on pod air filters. And I added a second inlet on the original side to use the snorkle still. But I need to filter this air as well. So iI took some uni foam and will spray it down with foam oil and roll it up and put it into the upper air box to filter the snorkle.

Attachments:
2013-04-08_18-44-08_523.jpg
2013-04-08_18-44-08_523.jpg [ 32.61 KiB | Viewed 7956 times ]
2013-04-08_18-44-00_178.jpg
2013-04-08_18-44-00_178.jpg [ 35.14 KiB | Viewed 7956 times ]
2013-04-08_23-39-02_212.jpg
2013-04-08_23-39-02_212.jpg [ 35.57 KiB | Viewed 7956 times ]
2013-04-08_23-39-24_619.jpg
2013-04-08_23-39-24_619.jpg [ 24.98 KiB | Viewed 7956 times ]
2013-04-08_23-40-01_150.jpg
2013-04-08_23-40-01_150.jpg [ 34.82 KiB | Viewed 7956 times ]
2013-04-08_23-40-12_676.jpg
2013-04-08_23-40-12_676.jpg [ 32.81 KiB | Viewed 7956 times ]
Author:  shoubadaba [ Tue Apr 09, 2013 3:14 am ]
Post subject:  Re: Fl350 prefilter system
More

Attachments:
2013-04-08_23-40-35_447.jpg
2013-04-08_23-40-35_447.jpg [ 33.05 KiB | Viewed 7955 times ]
2013-04-08_23-40-43_79.jpg
2013-04-08_23-40-43_79.jpg [ 60.36 KiB | Viewed 7955 times ]
2013-04-08_18-43-46_390.jpg
2013-04-08_18-43-46_390.jpg [ 60.43 KiB | Viewed 7955 times ]
2013-04-08_23-40-58_626.jpg
2013-04-08_23-40-58_626.jpg [ 54.56 KiB | Viewed 7955 times ]
Author:  trailnablaze [ Wed Apr 10, 2013 10:39 am ]
Post subject:  Re: Fl350 prefilter system
Looks good.. I have done something similar, and has worked out great thus far.
Image
Image
Author:  Randy J. [ Wed Apr 10, 2013 10:40 am ]
Post subject:  Re: Fl350 prefilter system
[quote="trailnablaze"]Looks good.. I have done something similar, and has worked out great thus far.
Image
Image[/quote


Where did you get the honda seatbelt pads/covers? are they 3" seatbelts?

Thanks...Randy
Author:  trailnablaze [ Wed Apr 10, 2013 10:48 am ]
Post subject:  Re: Fl350 prefilter system
The covers/pads came from EBay, and are universal for 2 & 3" belts. I have 2" 4 point. They were like $10.
Author:  shoubadaba [ Wed Apr 10, 2013 2:46 pm ]
Post subject:  Re: Fl350 prefilter system
Got my filters in and fitted. They are gauze like k&n filters but 1/4 the cost. They will be oiled and use a outerware as well. Just need to paint the airbox lid and install new factory sticker.

Attachments:
2013-04-09_16-58-29_539.jpg
2013-04-09_16-58-29_539.jpg [ 61.81 KiB | Viewed 7901 times ]
2013-04-09_16-58-21_309.jpg
2013-04-09_16-58-21_309.jpg [ 54.96 KiB | Viewed 7901 times ]
2013-04-09_16-58-10_149.jpg
2013-04-09_16-58-10_149.jpg [ 58.75 KiB | Viewed 7901 times ]
Author:  Nuke Em [ Wed Apr 10, 2013 3:11 pm ]
Post subject:  Re: Fl350 prefilter system
Looks really nice Rusty, and I like the unique(bitchen) looks too. Triple hole flow should run like an open lid! lol

You still need a thumb throttle?

Gary
Author:  shoubadaba [ Wed Apr 10, 2013 3:49 pm ]
Post subject:  Re: Fl350 prefilter system
Thanks.Sure do buddy.
Author:  Nuke Em [ Thu Apr 11, 2013 10:53 am ]
Post subject:  Re: Fl350 prefilter system
I found one. Anything else?
Author:  shoubadaba [ Thu Apr 11, 2013 1:11 pm ]
Post subject:  Re: Fl350 prefilter system
I don't think i need anything else. I found some gaskets I had from the briggs stuff for your Engine Ill send you those thanks again. Hows the suburban comming along?
Author:  redskinman [ Thu Apr 11, 2013 1:28 pm ]
Post subject:  Re: Fl350 prefilter system
It looks reallly good.Are you running the stock gas tank? Seems like when I was doing mine I had trouble deciding where to put the elbows because of room,is the gas tank going to fit back up there with those elbows there?
Author:  shoubadaba [ Thu Apr 11, 2013 5:50 pm ]
Post subject:  Re: Fl350 prefilter system
Yup stock tank with no fitment issues elbow barely kisses fuel line. Took the tank out to replace the pullstart

Attachments:
2013-04-11_14-47-00_406.jpg
2013-04-11_14-47-00_406.jpg [ 63.52 KiB | Viewed 7847 times ]
2013-04-11_14-47-09_690.jpg
2013-04-11_14-47-09_690.jpg [ 61.54 KiB | Viewed 7847 times ]
Author:  redskinman [ Thu Apr 11, 2013 6:05 pm ]
Post subject:  Re: Fl350 prefilter system
Good,that would have really sucked if it didnt fit,lol :shock:
I had drilled holes and put it some of those round mini filters in my airbox,I think that was one of my issues about where to put the elbows.I don't have it anymore so I cant look at it and remember :-)
Author:  hoser [ Thu Apr 11, 2013 6:06 pm ]
Post subject:  Re: Fl350 prefilter system
shoubadaba wrote:
Yup stock tank with no fitment issues eldo barely kisses fuel line. Took the tank out to replace the pullstart


Nice fit nice mod its a shame Honda didnt think of it :-)
Author:  fully [ Sat Jun 07, 2014 9:11 pm ]
Post subject:  Re: Fl350 prefilter system
old thread i know, but how did this work out for you. did those small cone filters hold up at all. also you don't happen to remember what size they were?
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/