PilotOdyssey.com
http://www.pilotodyssey.com/PO/

Custom Knuckle Spacer fl400 42621-HE0-000 Collar
http://www.pilotodyssey.com/PO/viewtopic.php?f=106&t=9081
Page 1 of 2

Author:  speedchaser [ Sun Apr 03, 2011 4:14 pm ]
Post subject:  Custom Knuckle Spacer fl400 42621-HE0-000 Collar

for sale

custom knuckle spacer replaces fl400 42621-HE0-000 Collar (Discontinued)

$7 each with free shipping postal money order
$12 for two free shipping postal money order

PayPal will be about 5% more
$7.35 each free ship
$12.60 for two free ship

This run I just finished up about 60 pieces

Thanks For looking


SpeedChaser :-)

Attachments:
DSCN4329.jpg
DSCN4329.jpg [ 487.29 KiB | Viewed 2442 times ]

Author:  afastcar [ Sun Apr 03, 2011 4:30 pm ]
Post subject:  Re: custom knuckle spacer fl400 42621-HE0-000 Collar

I will take 3 sets let me know how you want me to pay? Thanks again for making all these parts!

Author:  mudbogger [ Mon Apr 04, 2011 8:31 pm ]
Post subject:  Re: custom knuckle spacer fl400 42621-HE0-000 Collar

4 sets please as well SPEEDCHASER! and thanks for making them!

Author:  Pro-Pilot-Popper [ Tue Apr 05, 2011 1:13 am ]
Post subject:  Re: custom knuckle spacer fl400 42621-HE0-000 Collar

Is this something i really really need? LOL I'm not sure where one goes, but I don't think I have any. :-)

Author:  rmesser [ Tue Apr 05, 2011 9:39 am ]
Post subject:  Re: custom knuckle spacer fl400 42621-HE0-000 Collar

Pro-Pilot-Popper wrote:
Is this something i really really need? LOL I'm not sure where one goes, but I don't think I have any. :-)



This is the spacer that goes between the two bearings in the rear knuckle. the rear axle outside end goes through the bearings and nut goes on the end of the axle and gets tightened - putting pressure on the inner bearing races - this spacer keeps the inner bearing race spacered at the correct distance so there are not unwanted forces applied to the bearings when the nut is tightened.

If the bearings lockup and spin inside the knuckle it can damage this spacer - so when you replace the bearings and if the spacer is damaged the new bearings may wearout prematurely due the damaged spacer not spacing properly.

Do you need one - Honda no longer sells them, If you plan on keeping your pilot until you die like i do, you will eventually need two, Even if I do not need one I will buy it anyway as speed took the time to machine a discontinued part and offer it to the group -I want to support part replacement as much as i can.

Part #1 in diagram Hope this helps.

Attachments:
swingarm.JPG
swingarm.JPG [ 65.98 KiB | Viewed 2368 times ]

Author:  hoser [ Tue Apr 05, 2011 11:12 am ]
Post subject:  Re: custom knuckle spacer fl400 42621-HE0-000 Collar

Right on rmesser, NOT to sound like a saleman for Speedchaser this is a must own for any Pilot owner, I have had the rear axle bearings fail two times on me both times damage was done to the distance spacer Speedchaser made for us.

After every ride trip part of my post ride trip inspection is to jack up the Pilot get all 4 tires off the ground and check the wheel bearings for play, both times this inspection has failed me on the rear bearings I have come to the conclusion with the axle installed you just can feel a bearing going bad.

By time you feel something wrong while driving, the rear tire feels loose, its too late most the time the distance spacer is damaged and needs replaced, so if you never trash one where you going to get one, thanks to Speedchaser I will have two in my spare parts box.

If you install new bearings and use the old spacer and the old spacer is damaged where its length has changed the new bearings will NOT LAST long because they are being crushed when you tighten the big nut that holds it all together putting excess side loads on the bearings.

Again not trying to sound like a salesman but having at least one of these spacers in your spare parts box is a must.

Author:  davidafco [ Tue Apr 05, 2011 11:46 am ]
Post subject:  Re: Custom Knuckle Spacer fl400 42621-HE0-000 Collar

I got me a set coming for sure.

Author:  Pro-Pilot-Popper [ Tue Apr 05, 2011 4:07 pm ]
Post subject:  Re: Custom Knuckle Spacer fl400 42621-HE0-000 Collar

sounds good to me, How long before How much time do I have to put a order in. I gotta sell something. LOL

Author:  Hare [ Wed Apr 06, 2011 7:55 am ]
Post subject:  Re: Custom Knuckle Spacer fl400 42621-HE0-000 Collar

even when the spacer is not damaged it wears over time, i replaced mine every other bearing job on my dirt bikes. when the spacer wears smaller it makes the wheel bearings push inward on the inside race causing them to wear out much faster.

Author:  davidafco [ Wed Apr 06, 2011 4:02 pm ]
Post subject:  Re: Custom Knuckle Spacer fl400 42621-HE0-000 Collar

Received my collars today. Thanks speed!

Author:  afastcar [ Thu Apr 07, 2011 10:52 am ]
Post subject:  Re: Custom Knuckle Spacer fl400 42621-HE0-000 Collar

got mine thanks again for all the great work, we need to get you a pilot so you can start making us bumpers :-)

Author:  hoser [ Thu Apr 07, 2011 11:11 am ]
Post subject:  Re: Custom Knuckle Spacer fl400 42621-HE0-000 Collar

Bumpers Bumpers Bumpers!

Author:  mudbogger [ Thu Apr 07, 2011 7:51 pm ]
Post subject:  Re: Custom Knuckle Spacer fl400 42621-HE0-000 Collar

Oh please bumpers!!!!

Author:  Stoneman [ Thu Apr 07, 2011 8:00 pm ]
Post subject:  Re: Custom Knuckle Spacer fl400 42621-HE0-000 Collar

Pilot Bumpers and nerfs

Author:  davidafco [ Thu Apr 07, 2011 8:16 pm ]
Post subject:  Re: Custom Knuckle Spacer fl400 42621-HE0-000 Collar

He told me he needs a pilot frame to make bumpers. Anybody got a doner frame? lol

Author:  hoser [ Thu Apr 07, 2011 10:12 pm ]
Post subject:  Re: Custom Knuckle Spacer fl400 42621-HE0-000 Collar

davidafco wrote:
He told me he needs a pilot frame to make bumpers. Anybody got a doner frame? lol



I just need to stop by his place on my way North this summer to ride he can model off my Pilot.

Author:  Stoneman [ Thu Apr 07, 2011 10:44 pm ]
Post subject:  Re: Custom Knuckle Spacer fl400 42621-HE0-000 Collar

davidafco wrote:
He told me he needs a pilot frame to make bumpers. Anybody got a doner frame? lol

I have a frame.
Shipping would be a killer.

Author:  mudbogger [ Sat Apr 09, 2011 5:37 pm ]
Post subject:  Re: Custom Knuckle Spacer fl400 42621-HE0-000 Collar

I have 3 as well.

Author:  Lonerider [ Mon Apr 11, 2011 9:37 pm ]
Post subject:  Re: Custom Knuckle Spacer fl400 42621-HE0-000 Collar

Thanks Speed!

Just received the spacer today....don't need them yet, but good to have on hand....

Thanks again!

Author:  hoser [ Tue Apr 12, 2011 4:38 am ]
Post subject:  Re: Custom Knuckle Spacer fl400 42621-HE0-000 Collar

Spacers here and packed with my spare wheel bearings, took a marker and wrote a description what they are and the Honda part number on them.

Thanks big time Speedchaser.

Author:  go oddy [ Mon Apr 18, 2011 3:40 pm ]
Post subject:  Re: Custom Knuckle Spacer fl400 42621-HE0-000 Collar

Got my spacers today.. Thanks very much speed...
and Yes BUMPERS and NERFS....

Author:  pilotpete1 [ Tue Apr 19, 2011 12:51 pm ]
Post subject:  Re: Custom Knuckle Spacer fl400 42621-HE0-000 Collar

Got mine today, many thanks speed :-) :-) :-)

Author:  speedchaser [ Mon Feb 13, 2012 5:15 pm ]
Post subject:  Re: Custom Knuckle Spacer fl400 42621-HE0-000 Collar

Update Will be running some more this week if any body is interested please let me know here

thanks Speedchaser

Author:  rmesser [ Mon Feb 13, 2012 5:38 pm ]
Post subject:  Re: Custom Knuckle Spacer fl400 42621-HE0-000 Collar

Thanks again Speed for all you do.

Author:  david_phillips95 [ Mon Feb 13, 2012 6:41 pm ]
Post subject:  Re: Custom Knuckle Spacer fl400 42621-HE0-000 Collar

I'll take two sets if you would be able to offer shipping to the UK.

Thanks,

David.

Page 1 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/