PilotOdyssey.com http://www.pilotodyssey.com/PO/ |
|
Fl350 Custom Fender Bracket by speedchaser http://www.pilotodyssey.com/PO/viewtopic.php?f=107&t=4966 |
Page 1 of 1 |
Author: | speedchaser [ Fri Dec 12, 2008 9:01 pm ] | |||||||
Post subject: | Fl350 Custom Fender Bracket by speedchaser | |||||||
Hello worked on Fl350 fender brackets today and got the rear bracket closes to the front I end up using 6061 1/4 thick aluminum so far so good I like the way it's going to look will be posting on each bracket there are five different styles on the fl350 thanks for looking SpeedChaser http://pilotodyssey.com/speedchaser.htm
|
Author: | speedchaser [ Fri Dec 12, 2008 9:02 pm ] | |||||
Post subject: | ||||||
next P.S. Just to let you know i scraped about 5 to 6 brackets to get one that was satisfied with thanks Speeed
|
Author: | mudbogger [ Fri Dec 12, 2008 9:11 pm ] |
Post subject: | |
Nice work Speed-all 3 rear mounts going to be fabbed? |
Author: | adnoh [ Fri Dec 12, 2008 9:42 pm ] |
Post subject: | |
Nice speed, you gona use stock fastners or anodized ones. |
Author: | Stoneman [ Fri Dec 12, 2008 9:50 pm ] |
Post subject: | |
beautiful! I would be in for a set for the pilot if you ever do pilot brackets |
Author: | Sunblock [ Fri Dec 12, 2008 10:54 pm ] |
Post subject: | |
Really nice. I am mad that I already have a spare set now. I am going to have to dig through my parts boxes and make sure I am not missing any. You are a great asset to the community speed. |
Author: | mudbogger [ Sat Dec 13, 2008 1:23 am ] |
Post subject: | |
I concur. Check your messages in the chat SPEED please-- |
Author: | mozzy [ Sat Dec 13, 2008 10:11 am ] |
Post subject: | |
Speed, you are tha man!!!! I'll be looking forward to the finished product! |
Author: | speedchaser [ Tue Dec 16, 2008 7:28 pm ] | |||||||
Post subject: | ||||||||
Hello Made some head way today finished up the rear back bracket and started the rear center brackets the rear has a tight bend which was fun had to heat aluminum up to aprox 650 deg. F. so i will not crack. The rear center as some wicked bend to it also but the shape was fun too so it would not hit fender. This project as been a good challenge and is fun! Just to let every body know that each bracket has been drawn up as it would be flat before the bending. then bend the part to get the hole to line up too. then put it into production. this process takes time but in the end i will be able to make the next batch much faster because all the hard work and documentation is done all ready Thanks For Looking SpeedChaser
|
Author: | speedchaser [ Tue Dec 16, 2008 7:28 pm ] | |||||||
Post subject: | ||||||||
layout on the rear center bracket left side and some other pic's to add thanks for looking SpeedChaser
|
Author: | mudbogger [ Tue Dec 16, 2008 8:35 pm ] |
Post subject: | |
Up for sale?-if so min of 3 sets for me please--- |
Author: | mozzy [ Wed Dec 17, 2008 9:11 am ] |
Post subject: | |
A bracket goes on the shock bolt? Hmmmmm, the bolts I bought may be too short now. Keep up the good work Speed & save me a set. |
Author: | Nuke Em [ Wed Dec 17, 2008 9:43 am ] |
Post subject: | |
Nice, to say the least. Save me a set too. I'll send you to money for them and the tranny very soon, when I finish moving. I had to change a battery in a 5 ton work truck yesterday morning with a windchill in the Minot ND 50-60 below windchills. That is real-deal cold. Warmer over here in Montana this morning, but couldn't be much colder I guess. lol Hey, that's a fine looking shock with a screw in it. lol Is it doing what you needed it to do? Gary |
Author: | speedchaser [ Wed Dec 17, 2008 11:54 am ] |
Post subject: | |
mozzy wrote: A bracket goes on the shock bolt? Hmmmmm, the bolts I bought may be too short now.
Keep up the good work Speed & save me a set. the rear shock bolt is a shoulder bolt the shank of the bolt is 15mm the threaded end is 14mm x 1.5 by 109.5 mm long which is aprox 4-5/16" long with the stock bolt installed with new bracket it is flush to the frame on threaded end. thanks speedchaser |
Author: | speedchaser [ Mon Dec 22, 2008 7:12 pm ] | |||||||
Post subject: | ||||||||
Finished up front brackets the first bend was a off set had to make die to push the stock sideways thanks for looking will be posting in the for sale forum soon SpeedChaser
|
Author: | speedchaser [ Mon Dec 22, 2008 7:13 pm ] | ||||
Post subject: | |||||
got creative on the flange washer for the top bolt on all brackets thanks for looking Speed
|
Author: | hoser [ Mon Dec 22, 2008 7:34 pm ] |
Post subject: | |
Outstanding fabrication you have out done yourself once again! Thanks so much for what you do! |
Author: | mudbogger [ Mon Dec 22, 2008 8:13 pm ] |
Post subject: | |
Dam nice work, as usual you have done it again friend-BRAVO!! |
Author: | mozzy [ Tue Dec 23, 2008 6:27 am ] |
Post subject: | |
I'm with them! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |