Finished.
I replaced a rack boot,made spacers to take up slack in the hubs,wired in two cigarette lighters in the glove box,one with two USB ports built in. Installed a 3000lb winch with synthetic rope and made a stopper for it out of a castor wheel. I installed a switch for the winch in the dash and made a remote switch which I used a cat 5 cable for and installed a plug for it in the glove box. Installed my gps which plugs into my cigarette lighter in the glove box.
Had to totally redo my roof frame. It was one of the first things of this type I've ever built and it showed. Was no way I would have used it as it was. The top is a CJ5 top. I used the factory snaps and a few screw gromits so I can easily replace it.
I rebuilt the fenders. I changed hoods from one of my others. I also made a fold down windshield with a center brace.
I cut all rust from the bed ,ground it down and cleaned it up and painted it. I used thick 2.5" aluminum angle to frame out the edges and installed the bed liner. I opted to not use the tailgate but made a wire section to keep stuffin and to have a place to snap the back flap down.
Still need two tail lights but I'm calling it done.
| Attachments: |
|
image.jpg [ 49.12 KiB | Viewed 168 times ] |
|
image.jpg [ 77.94 KiB | Viewed 168 times ] |
|
image.jpg [ 88.19 KiB | Viewed 168 times ] |
|
image.jpg [ 69.12 KiB | Viewed 168 times ] |
|
image.jpg [ 73.13 KiB | Viewed 168 times ] |
|
image.jpg [ 53.85 KiB | Viewed 168 times ] |