Asking for a mate of mine.
Any CDI (Capacitor Discharge Ignition) substitute from other machines that'll work for a FL250?
Cheers Baz

Yes sir:
Use this chart below to search for cheaper Priced CDI (Capacitor Discharge Ignition) boxes. I was able to use the chart and find cheaper CDI (Capacitor Discharge Ignition) boxes on Ebay. I picked a few up for $10 now using this method. Perhaps this will help a member out in Odyssey land.

HONDA ATC110 1981-1983 30410-958-003
HONDA ATC185 1980-1980 30410-958-003
HONDA ATC185S 1981-1983 30410-958-003
HONDA ATC200 1981-1983 30410-958-003
HONDA ATC200E 1982-1983 30410-958-003
HONDA FL250 1981-1984 30410-950-003
HONDA PA50II HOBBIT 1981-1983 30410-187-008
HONDA NH80MD 1983-1985 30410-187-008
HONDA NN50MD 1984-1984 30410-187-008
HONDA NU50 1982-1983 30410-187-008
HONDA NX50 1981-1982 30410-187-008
HONDA NA50 1981-1981 30410-187-008
HONDA NC50 1981-1983 30410-187-008
HONDA NH125 1984-1984 30410-187-008

I know they plug in the same. The two I bought listed as a ATC110 work great in my FL250. I am thinking the models That part number ends with 003 has worked in my fl250. The 008 I have not tried.

Taken from this thread: viewtopic.php?f=63&t=9195
CO

Edit: Verify plug style. I have seen units advertised as ATC110 but I see two style plugs.
CO

You can also contact these guys: https://www.rickystator.com/page/contact
They seem to have a lot of electrical stuff.
I remember them advertising FL stators as well.
CO

Don't want to high jack your thread but Ricky stator also sells other stuff like steering rods and ends. The FL350 steering rod is 16.75" long but Ricky stator sells 16.25" rods and ends. So you would lose some adjustment. I make my own but some here do not have the tooling.
https://www.rickystator.com/product/hard-parts/honda
Just thought I would post.
CO