Im just trying to confirm the puller size for the 102c for a fl350 is a 3/4-16 fine thread bolt. Does anyone have one they want to sell?? I searched the forum and found some info just wanted to confirm before i goto the hardware store to get one and some rod. Can the bolt and rod just butt together or do they have to be connected to prevent any damage??
thanks for the help...
Randy

http://www.pilotodyssey.com/PO/viewtopic.php?f=1&t=4830

What ever you use you need to make sure the thing your pushing on the end of the crankshaft with is not going to damage the end of the crank or the threads in the crank.

You also should bevel the threads on the end of your bolt so if the pin your pushing against does damage to the end of your bolt it cant damage the threads then the threads in your clutch as you try to remove the bolt with the mushroomed end and the damaged threads....