Is the ball joints on the front suspension trailing arms replaceable? None have any play in them except for one. i was considering drilling it out of the spindle (previous owner either stripped the threads or broke them off because the it is welded onto the spindle) and then putting a new ball joint onto the arm but before i want to make sure i am able to do so. Honda i believe has them labeled as 1 part number for both the arm and ball joint. If they are un replaceable could i drill them out and make a new hole to hold a new ball joint?

Is this for pilot or Odyssey?
assuming Odyssey and I have no answer, the pilot is not replaceable, replace the a arm or do a modification to accept quad ball joints.

Its for the fl350

Read this thread I did: viewtopic.php?f=1&t=17888&hilit=ball+joint
CO