PilotOdyssey.com
http://www.pilotodyssey.com/PO/

Front trailing arm ball joint
http://www.pilotodyssey.com/PO/viewtopic.php?f=26&t=20640		 Page 1 of 1
Author:  commandero [ Mon Dec 07, 2020 2:26 pm ]
Post subject:  Front trailing arm ball joint
Is the ball joints on the front suspension trailing arms replaceable? None have any play in them except for one. i was considering drilling it out of the spindle (previous owner either stripped the threads or broke them off because the it is welded onto the spindle) and then putting a new ball joint onto the arm but before i want to make sure i am able to do so. Honda i believe has them labeled as 1 part number for both the arm and ball joint. If they are un replaceable could i drill them out and make a new hole to hold a new ball joint?
Author:  Kuma [ Mon Dec 07, 2020 2:57 pm ]
Post subject:  Re: Front trailing arm ball joint
commandero wrote:
Is the ball joints on the front suspension trailing arms replaceable? None have any play in them except for one. i was considering drilling it out of the spindle (previous owner either stripped the threads or broke them off because the it is welded onto the spindle) and then putting a new ball joint onto the arm but before i want to make sure i am able to do so. Honda i believe has them labeled as 1 part number for both the arm and ball joint. If they are un replaceable could i drill them out and make a new hole to hold a new ball joint?


Is this for pilot or Odyssey?
assuming Odyssey and I have no answer, the pilot is not replaceable, replace the a arm or do a modification to accept quad ball joints.
Author:  commandero [ Mon Dec 07, 2020 3:00 pm ]
Post subject:  Re: Front trailing arm ball joint
Its for the fl350
Author:  canadian oddy [ Mon Dec 07, 2020 4:02 pm ]
Post subject:  Re: Front trailing arm ball joint
Read this thread I did: viewtopic.php?f=1&t=17888&hilit=ball+joint
CO
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/