Come ride with me!!!
I am off the Lenwood exit and behind the KFC by the outlet mall... Just a short trip to the outlet exit OHV area!!!

I did some night riding... WOW what a difference... Someone come out and film me so I can get my shocks dialed in...

here is some turbovision... Something different at night...
http://www.youtube.com/watch?v=R-G2rJxe_8o

Davo,you crazy SOB! What lights are you running there?
I headbutted the PC monitor 3 times trying to see where the hell you were goin'!
Ive seen more Lite in low calorie Beer Mate!
Switch to HID's,far superior light and uses less wattage/amperage.Less taxing(Hate that word!) on your alt system as well.
A std HID light,uses about 33Watts/3A,but has more output than a 100W/8A, QH light.
Either that...or eat more carrots Mate!

PS,another option #2...How many burnin' Korans does it take to light the way for Turbo?

Well my day ended early! I came back from a 20 mile loop and found a cv boot was ripped! Damnit! These are real new boots from NAPA! I was hoping these would be a good replacement...
I swapped out my coilover rears and put my airshocks back on! The air shocks work so much better! I am sending the coilovers back to get revalved and the fronts (one) has a seal leak!
I see a long travel addition in the near future! After riding here and remembering how well my works shocks worked out here on the odyssey, I might be going that route???

may want to try the empi boots. they are working well for me. just a thought are you burpping the boot befor you tighten the clamps? and make sure you have the right distance between the cv's before you burp and tighten the clamps.

could a rock of hit this boot just right and done this damage???

Part numbers??? Who did you get them from? I have some oem honda's but wanted to test these out first...
I do burb them, but no I didn't have them in a vise to get tehj distance right...

This from a post from sandman, he did all the legwork on the EMPI boots...


I got them through Topline Parts http://www.toplineparts.com" .".. as EMPI is in Ahaheim California and so is Topline.

The outboard boot is part# 86-1033D
The inboard boot is part# 86-2131D

Order the better full circle clamps part# 86-5795 you get one small clamp and one large clamp per kit with this part number.

If you have any questions just let me know.

Sandman

So Baz don't bump his head...