Are you going to be competing?

Awesome. Best of luck!

Awesome! good luck

Get video steve and enjoy

Thank you Sir.

Well you will not believe this until I post some pics which I will do later, I snapped yes snapped my left front lower control arm, 1 inch. .095 Chromoly.

Also lost my camera which depending on where it broke off would have had some great video, one spot I missed a cut off on the track because of a big wash out, I went right through it, 2 big wash out spots with 2 little tiny high spots that I centered on top of and hoped for the best, the 2 spots ended and it was fun from there, I ended up getting tossed around hard and shot out the right side of it straight in to the air and landed in the weeds, I saw nothing but blue sky for a moment but she landed on her feet and off we went.

I broke my left front lower arm 2/3 of the way through the second lap, they were 17 mile laps on a very very rough course. We were running 6 laps. Stinks because I was second to start with only a 2017 Yamaha YXZ or YFZ 1000 with 18 inches of wheel travel in front of me, I got around him 1/4 of the first lap. His copilot told me later that after I got around them I was gone, they could not see me, he also said that there driver was pushing very hard to catch me which resulted in them having an accident. The Driver had to go to the hospital with a hurt back but I am told he is OK. Quite a few people had accidents, mostly the quads and bikes, no serious injuries thank goodness.

I would say more but I have to go and unload my broke baby and then my wife and I are going to go and look for my camera, I think I lost it on the spot where I missed the cutoff and went through a big wash out.

HERe is the link but I’m pretty sure you can only view through Facebook. I don’t know how or if it can be converted to watch if you aren’t on fb. The video would have to upload to you tube and then everyone could watch it. https://www.facebook.com/chrisharalson/ ... 403908954/

Couple more.

CO, yes it should most after market Racey arm have a plate on bottom that help take up the shock load. With the shock location and wheel rate that far up the arm it subseptable and to breakage form all the welding. I would say it broke there due to the additional tube supporting the arm close to the wheel.
Also look at the stock Honda pilot arm . Good old Honda once again on top of it. This is why on mine I move the shock closer to the wheel on the lower arm. Not only better wheel rate also softer spring rate for bottom out poundage.

I should also add look at the arms in the other post for new long travel . Same thing no plate or reforcment with with shock mount further up the arm. . The plate is welded along the bottom not all the way around and spread the load out. Not to big as the tube need to have some flex.