Here is a Engine I picked up from a guy on the 3 wheeler board, I have another Engine but the rod is real loose I bought this one hoping the crank was good to use in the other one.
Here is what the owner had to say about it
Quote:
The Engine was rebuilt 5 years ago and has less than 2 hours on it. It still has 2 problems that weren't rectified during the rebuild. 1) The 3rd gear is bad, plenty of power to double shift 2nd to 4th. 2.) The Engine case half with the drain plug, the drain plug hole is slightly stripped so you can only hand tighten the bolt. It's never leaked, but it's still a minor problem. Otherwise, the head was bought new from Honda which I had pulled off as I was readying to list it on ebay so you probably want a new head gasket for it, the jug was bored and honed which was the first one on the jug, the crank was split and balanced with a new rod put on it, and the clutch components were new.
Below are pics he sent with it ..
| Attachments: |
|
1.jpg [ 41.46 KiB | Viewed 22948 times ] |
|
2.jpg [ 22.85 KiB | Viewed 22948 times ] |
|
3.jpg [ 53.22 KiB | Viewed 22948 times ] |
|
4.jpg [ 80.03 KiB | Viewed 22948 times ] |
|
5.jpg [ 50.92 KiB | Viewed 22948 times ] |
|
6.jpg [ 68.63 KiB | Viewed 22948 times ] |
|
7.jpg [ 69.17 KiB | Viewed 22948 times ] |