Mudbogger sent me a basket case Engine, well its mostly together he started working on it then got frustrated and just shipped it to me, I got a little caught up this weekend so thought I would take a quick look inside so parts could be ordered.
The cylinder looks like it had a new piston installed and it was never honed, if it was honed it was not done correctly their is not cross hatch pattern, the ports were not beveled the exhaust bridge was not relieved no holes were drilled in the piston.
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
Parts list.
TWO 90601-430-000 Cir CLIP (1.2X18) circlips
SIX 90011-HA2-000 BOLT, SPECIAL STUD head studs
SIX 90443-107-000 NUT, CAP (8MM) head nuts
TWO 94301-12200 PIN, DOWEL (12X20) cylinder dowels
FOUR 94050-10000 NUT, FLANGE (10MM) Cylinder nuts
ONE 90445-KAE-000 WASHER, LOCK (18MM) Big lock washer for clutch
SIX 22321-KF0-770 PLATE, CLUTCH metal clutch plates.
ONE 22100-HA2-000 OUTER COMP., CLUTCH Clutch basket
(((Rings coming from Odystable)))
I will add more as required.
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
Since you already ordered some parts I will start a "PARTS II" section to add the rest of the parts needed, don't ORDER PARTS UNTIL I TELL YOU TO!!!! this is just a list!!!
=========================================================================
PARTS LIST II ((These are the bottom end case gaskets and seals))
91202-KA3-711 OIL SEAL (10X17X4) $3.56 $2.7 <Remove>
91207-ML3-003 OIL SEAL (28X40X8) $9.45 $7.18 <Remove>
91202-HA2-771 OIL SEAL (28X50X8) $10.15 $7.7 <Remove>
91201-KA4-004 OIL SEAL (38X58X11) $13.65 $10.36 <Remove>
11352-HA2-000 GASKET, L. COVER $10.71 $8.13 <Remove>
11395-HA2-306 GASKET, R. $15.77 $13.05 <Remove>
91204-KF0-003 OIL SEAL (20X28X5) $5 $3.8 <Remove>