PilotOdyssey.com
http://www.pilotodyssey.com/PO/

Triple EEE Gen 3 car For Sale
http://www.pilotodyssey.com/PO/viewtopic.php?f=34&t=12141		 Page 1 of 2
Author:  mudbogger [ Tue May 07, 2013 5:26 pm ]
Post subject:  Triple EEE Gen 3 car For Sale
I have had the great pleasure of purchasing my first Triple EEE. The car is in amazing shape from what I have researched on the net/forums.
The car is basically turn key currently. I will do fluids changes and such over the coming weekend. I went over the frame and Engine for several hrs yesterday and found no cracks, broken welds, nothing. I would love any feedback from you guys where these frames and or engines are suspect to cracks, etc. The head has a decal on it, any ideas where that manufacturer is?
Some pictures.

Attachments:
Triple EEE 021.jpg
Triple EEE 021.jpg [ 40.34 KiB | Viewed 11218 times ]
Triple EEE 022.jpg
Triple EEE 022.jpg [ 38 KiB | Viewed 11218 times ]
Triple EEE 030.jpg
Triple EEE 030.jpg [ 43.85 KiB | Viewed 11218 times ]
Triple EEE 025.jpg
Triple EEE 025.jpg [ 54.65 KiB | Viewed 11218 times ]
Author:  mudbogger [ Tue May 07, 2013 5:48 pm ]
Post subject:  Re: Triple EEE Gen 3 car
Tryed to start the car today. Since it is all new to me I wanted to make sure I know everything on it. I do not have any clue if the dash controls are stock or not, but in this case the starter works off a push button not key. The is a keyed switch but it wired for the main power to be turned off/on that is it. There is a separate switch for the external water pump and fan as well. Is this stock to these machines?
Anyway the starter button was stuck on, so it needs to be replaced and the battery went dead as well. This car has a charging system in it, do the gen 3 car typically have them? It is based off a FL 350 Odyssey with minor splices. You can see the starter in this picture:

Attachment:
Triple EEE 013.jpg
Triple EEE 013.jpg [ 40.48 KiB | Viewed 11217 times ]


The Engine from what I can find is a typical Gen 3 Engine. If you look closely at this picture there is a decal on the head, any idea on what/who made this head?

Attachment:
Triple EEE 016.jpg
Triple EEE 016.jpg [ 35.96 KiB | Viewed 11217 times ]


More to come dinner time!!
Author:  mudbogger [ Tue May 07, 2013 5:51 pm ]
Post subject:  Re: Triple EEE Gen 3 car
Look at this intake, was this made at Triple EEE?

Attachment:
Triple EEE 015.jpg
Triple EEE 015.jpg [ 26.67 KiB | Viewed 11217 times ]


I think it might be a Mosberger?
Author:  mudbogger [ Tue May 07, 2013 6:27 pm ]
Post subject:  Re: Triple EEE Gen 3 car
Trans pictures. Is this a Roberto? What trans is stock to these Gen 3?

Attachment:
Triple EEE 013.jpg
Triple EEE 013.jpg [ 40.48 KiB | Viewed 11213 times ]
Author:  mudbogger [ Tue May 07, 2013 6:30 pm ]
Post subject:  Re: Triple EEE Gen 3 car
General Engine pictures looking from the back:

Attachment:
Triple EEE 012.jpg
Triple EEE 012.jpg [ 38.96 KiB | Viewed 11212 times ]


Attachment:
Triple EEE 024.jpg
Triple EEE 024.jpg [ 43.34 KiB | Viewed 11212 times ]


Attachment:
Triple EEE 014.jpg
Triple EEE 014.jpg [ 24.78 KiB | Viewed 11212 times ]
Author:  hoser [ Tue May 07, 2013 6:33 pm ]
Post subject:  Re: Triple EEE Gen 3 car
Mudbogger wrote:
Trans pictures. Is this a Roberto? What trans is stock to these Gen 3?

Attachment:
Triple EEE 013.jpg


Vent tube on trans looks flatten ?

RPM trans copy
Roberto trans copy
http://www.team-moto.com/index.cfm?Acti ... Category=7

Image

Forward / Natural / Reverse

TEAM-MOTO FNR TRANSMISSION
INPUT: 1" W/ 1/4" KEYWAY
OUTPUT: 930 CV JOINT
POWER RATING: 170 HP
GEARS HARDENED: 50 ROCKWELL
CASING: ALUMINUM CASE
GEAR RATIO: 9:1

Perfect for your Do-it -Yourself guys that need a forward / natural / reverse transmission on their go-kart, dune buggy or mini sandrail.
Author:  mudbogger [ Tue May 07, 2013 6:35 pm ]
Post subject:  Re: Triple EEE Gen 3 car
Also included are the original owners race totes. These totes are cataloged for each and every race in a log he kept. There is basically a replacement for everything on the Gen 3 excluding the Engine and frame. It does have spare carbs, reeds, heads, jugs, BUT NO PISTONS for some reason.You name it I got it, even have 4 tubes in case of a tire going down!

Attachments:
Triple EEE 033.jpg
Triple EEE 033.jpg [ 33.19 KiB | Viewed 11212 times ]
Triple EEE 028.jpg
Triple EEE 028.jpg [ 46.39 KiB | Viewed 11212 times ]
Triple EEE 029.jpg
Triple EEE 029.jpg [ 33.66 KiB | Viewed 11212 times ]
Author:  hoser [ Tue May 07, 2013 6:39 pm ]
Post subject:  Re: Triple EEE Gen 3 car
Pull the trans out lets see detail pics of it
Author:  mudbogger [ Tue May 07, 2013 6:40 pm ]
Post subject:  Re: Triple EEE Gen 3 car
Now something I thought was way way cool. Included with the purchase was a log book. In this log book 1 of the owners cataloged each and every setting he had or made on the Gen 3 for each and every race. Tire pressures, toe in, main jets, clutch pucks, temp, since 1992!! Here are some pictures for you.

Attachments:
Triple EEE 034.jpg
Triple EEE 034.jpg [ 39.23 KiB | Viewed 11210 times ]
Triple EEE 035.jpg
Triple EEE 035.jpg [ 22.68 KiB | Viewed 11210 times ]
Triple EEE 036.jpg
Triple EEE 036.jpg [ 32.19 KiB | Viewed 11210 times ]
Triple EEE 037.jpg
Triple EEE 037.jpg [ 27.86 KiB | Viewed 11210 times ]
Author:  shoubadaba [ Tue May 07, 2013 10:31 pm ]
Post subject:  Re: Triple EEE Gen 3 car
Trans is a chenowoth mini mag tranny. Impossible to find parts for. Cylinder is BV Bob Victorino. Engine is mostlikely 350 cc ported good. Reliable but much less hp then the briggs engines. Wheels are champion wheels out of cali. Intake manifold is a mossburger.
Author:  shoubadaba [ Tue May 07, 2013 10:35 pm ]
Post subject:  Re: Triple EEE Gen 3 car
Chassis is a gen 3 14 inches of travel and handles the rough stuff very well.
Author:  shoubadaba [ Tue May 07, 2013 10:41 pm ]
Post subject:  Re: Triple EEE Gen 3 car
Most people ran the charging systems it was just the natures recepie guys ran without them to run higher rpms. The main power kill switch was required by mteg (mickey thompson entertainment group). You should have a main power switch 1was fan switch 1 water pump switch and a starter button and a kill switch.
Author:  mudbogger [ Wed May 08, 2013 6:35 am ]
Post subject:  Re: Triple EEE Gen 3 car
I have seen the aircraft style kill switches but in this model I do not have one. thank you for the information on the trans and other items I appreciate the help. in a case of problems can a roberto be used in place?
Author:  mudbogger [ Wed May 08, 2013 6:36 am ]
Post subject:  Re: Triple EEE Gen 3 car
shoubadaba wrote:
Most people ran the charging systems it was just the natures recepie guys ran without them to run higher rpms. The main power kill switch was required by mteg (mickey thompson entertainment group). You should have a main power switch 1was fan switch 1 water pump switch and a starter button and a kill switch.



have you raced one of these by chance? are you a current owner of one possibly?
Author:  shoubadaba [ Wed May 08, 2013 10:03 am ]
Post subject:  Re: Triple EEE Gen 3 car
Have not raced one yet. I have owed a few eee cars now. Yes a roberto box can be swapped in but one of his current style. Just will need to be lined up and new mounts fabed up. Your car looks good still. I was gonna purchase it a few years ago when it was out here in cali bit I thought the owners price was a bit too high. I do remember him saying he had a spare tranny for it. Did you get it in your deal by chance?
Author:  mudbogger [ Wed May 08, 2013 10:32 am ]
Post subject:  Re: Triple EEE Gen 3 car
yes I do have it.
Author:  shoubadaba [ Wed May 08, 2013 8:55 pm ]
Post subject:  Re: Triple EEE Gen 3 car
Have you sat in it? Roof is a bit close with a helmet on?
Author:  mudbogger [ Wed May 08, 2013 9:10 pm ]
Post subject:  Re: Triple EEE Gen 3 car
Yes, but honestly the leg room is more of an issue then the helmet room. I was thinking of moving the pedals forward maybe 8-10 inches to give me a bit more room.I do not want to permanently weld these new mounts in to keep the car "true" but perhaps a bolt in mod?. Currently my knees are dam close to the cage bar under the wheel and I can see it causing many bruises. That's the biggest issue, the helmet does not bother me, but then again I have not ridden it.
I also wish to use the cable style choke and get away from the manual 1 I currently have. I have seen the briggs built 1's and I might try to get one of these cables.
Author:  Rppjr [ Wed May 08, 2013 11:47 pm ]
Post subject:  Re: Triple EEE Gen 3 car
Any idea on how many where made?
Bob
Author:  mudbogger [ Sat May 11, 2013 5:08 pm ]
Post subject:  Re: Triple EEE Gen 3 car
I do not have a clue. They were quite popular on the West Coast back in the day from what I have read. Here on the East Coast you really don't see or hear about them alot.
Author:  B S [ Sun May 19, 2013 11:42 pm ]
Post subject:  Re: Triple EEE Gen 3 car
Mudbogger wrote:
Look at this intake, was this made at Triple EEE?

Attachment:
Triple EEE 015.jpg


I think it might be a Mosberger?

looks like my afterthought motorspurts intake
Author:  B S [ Sun May 19, 2013 11:46 pm ]
Post subject:  Re: Triple EEE Gen 3 car
Mudbogger wrote:
Tryed to start the car today. Since it is all new to me I wanted to make sure I know everything on it. I do not have any clue if the dash controls are stock or not, but in this case the starter works off a push button not key. The is a keyed switch but it wired for the main power to be turned off/on that is it. There is a separate switch for the external water pump and fan as well. Is this stock to these machines?
Anyway the starter button was stuck on, so it needs to be replaced and the battery went dead as well. This car has a charging system in it, do the gen 3 car typically have them? It is based off a FL 350 Odyssey with minor splices. You can see the starter in this picture:

Attachment:
Triple EEE 013.jpg


The Engine from what I can find is a typical Gen 3 Engine. If you look closely at this picture there is a decal on the head, any idea on what/who made this head?

Attachment:
Triple EEE 016.jpg


More to come dinner time!!

the head is an BV racing cast head same as the one i got
Author:  utvfab [ Fri May 24, 2013 11:47 am ]
Post subject:  Re: Triple EEE Gen 3 car
The old owner of the car Bob raced it a few times out at Glen Helen in 2009-2010. It is a fast car and handles well. Somewhere on youtube there is video of Bob coming up a little short on the double and taking it for a tumble.
Author:  hoser [ Fri May 24, 2013 12:00 pm ]
Post subject:  Re: Triple EEE Gen 3 car
utvfab wrote:
The old owner of the car Bob raced it a few times out at Glen Helen in 2009-2010. It is a fast car and handles well. Somewhere on youtube there is video of Bob coming up a little short on the double and taking it for a tumble.



Any idea what to search for on youtube to find the video?
Author:  bullnerd [ Fri May 24, 2013 4:29 pm ]
Post subject:  Re: Triple EEE Gen 3 car
http://youtu.be/GPmBUxEAhzI" .".." ."..

Skip to about 1:30

UTV....was that your "old" Briggs showing him the way around the track?

BTW..Mud did you buy UTVs Briggs too?
Page 1 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/