PilotOdyssey.com
http://www.pilotodyssey.com/PO/

Pilot FL400 clutch plate option
http://www.pilotodyssey.com/PO/viewtopic.php?f=37&t=14651		 Page 1 of 1
Author:  rmesser [ Fri Aug 15, 2014 12:50 pm ]
Post subject:  Pilot FL400 clutch plate option
Maybe this is known but it is news to me. I was researching Pilot clutch plates Part number 22311-HE0-000. What I found is this same clutch plate is used on Honda 84-86 CR80R A. Well I was confused as to how a HE0 part number could be for a 1984-1986 machine, when the HE0 is for a pilot from 1989-1990. So I looked at the parts diagram for the CR80R A and it turns out the part number was superseded to 22311-HE0-000. See screen shot below. The original Part for the CR80R A is 22311-GC4-730. 22311-HE0-000 and 22311-GC4-730 must be the same part.

There are currently 3 different auctions for 22311-GC4-730 on ebay right now. I know the pilot requires 4, but this is a part number to search for if you need clutch plates.

Attachments:
Capture.JPG
Capture.JPG [ 9.89 KiB | Viewed 4605 times ]
Author:  rmesser [ Fri Aug 15, 2014 12:57 pm ]
Post subject:  Re: Pilot FL400 clutch plate option
This guy has 4 in stock.

http://www.ebay.com/itm/BRAND-NEW-OEM-H ... 14&vxp=mtr

This guy has 6

http://www.ebay.com/itm/NOS-1984-86-Hon ... 90&vxp=mtr

Get em while you can.
Author:  rmesser [ Fri Aug 15, 2014 1:00 pm ]
Post subject:  Re: Pilot FL400 clutch plate option
In this link MAS conforms they are the same part.

viewtopic.php?f=37&t=11758&p=131116&hilit=22311+GC4+730#p131116

MAS if you still need 1 (I believe you only received 3) This auction has 1 for sale.

http://www.ebay.com/itm/NOS-HONDA-CR80- ... b5&vxp=mtr
Author:  hoser [ Fri Aug 15, 2014 1:08 pm ]
Post subject:  Re: Pilot FL400 clutch plate option
I wonder if that is what was used in my LT Pilot and why they are thinner than what the book specs yet show little to no signs of wear?
Author:  rmesser [ Fri Aug 15, 2014 1:18 pm ]
Post subject:  Re: Pilot FL400 clutch plate option
MAS confirmed they are the same, and you know how he is on detail :-). I wouldn't think Honda would have subbed a different part. They both start with 22311. what does the first part of the part number stand for? Anyone know?

I bought a set of 4 22311-GC4-730 - I can compare them to my set of 22311-HE0-000 when I get them.
Author:  rmesser [ Mon Aug 18, 2014 11:32 am ]
Post subject:  Re: Pilot FL400 clutch plate option
I see these sold - anyone here buy them?

http://www.ebay.com/itm/BRAND-NEW-OEM-H ... 14&vxp=mtr
Author:  rmesser [ Mon Aug 18, 2014 11:35 am ]
Post subject:  Re: Pilot FL400 clutch plate option
This guy has 4 of the fl400 number, 22311-HE0-000, but they are rusty and way over priced. But he has them! He just doesn't know enough to list them for a FL400, Shipping is Free, but $60.00 for four plates. If you need em I guess ya gotta pay. Hell I wouldn't sell my NOS set for $60.00.

http://www.ebay.com/itm/NOS-OEM-Honda-1 ... 02&vxp=mtr
Author:  MAS Racing [ Wed Aug 20, 2014 12:09 am ]
Post subject:  Re: Pilot FL400 clutch plate option
rmesser wrote:
I this link MAS conforms they are the same part.

viewtopic.php?f=37&t=11758&p=131116&hilit=22311+GC4+730#p131116

MAS if you still need 1 (I believe you only received 3) This auction has 1 for sale.

http://www.ebay.com/itm/NOS-HONDA-CR80- ... b5&vxp=mtr

I am pretty sure it was nitrosport that was short one. I have two sets for myself. I miked nitrosports Pilot OEM one and compared it to the ones I ordered for the CR80 and it was a perfect match.

"They both start with 22311. what does the first part of the part number stand for? Anyone know?"

The first set of numbers describe the part (ex Clutch plate) The second set was the vehicle that it was made for usually the oldest one on the list. The third set was where it was manufactured. Different lots from different manufactures are why these numbers change most often.
Author:  nitrosport_5 [ Wed Aug 20, 2014 12:29 am ]
Post subject:  Re: Pilot FL400 clutch plate option
Yes it was me that was short one! i am going to go ahead and order 1 of the CR80 plates
Author:  rmesser [ Wed Aug 20, 2014 7:05 pm ]
Post subject:  Re: Pilot FL400 clutch plate option
I received 4 of the 22311-GC4-730 and like others have stated they are the same as 22311-HE0-000. :-)
Author:  nitrosport_5 [ Wed Aug 20, 2014 11:11 pm ]
Post subject:  Re: Pilot FL400 clutch plate option
rmesser wrote:
I received 4 of the 22311-GC4-730 and like others have stated they are the same as 22311-HE0-000. :-)


Awesome. I now have 2 complete he0 sets and 1 complete GC4 set :) now I wish there was an alternate Honda number for the fiber disks and springs. Those are all I am missing for a clutch rebuild. I've got ebc disks but Honda is always better
Author:  MAS Racing [ Wed Aug 20, 2014 11:17 pm ]
Post subject:  Re: Pilot FL400 clutch plate option
nitrosport_5 wrote:
Yes it was me that was short one! i am going to go ahead and order 1 of the CR80 plates

Glad it was you Nitrosport. I was getting a little worried and almost getting my a** kicked because it was my wife that was the one that miked them for me and I was starting to ask her if she was sure. After 20 yrs of marriage I should know by now that you never second guess the woman. :-)
Author:  nitrosport_5 [ Wed Aug 20, 2014 11:44 pm ]
Post subject:  Re: Pilot FL400 clutch plate option
MAS Racing wrote:
nitrosport_5 wrote:
Yes it was me that was short one! i am going to go ahead and order 1 of the CR80 plates

Glad it was you Nitrosport. I was getting a little worried and almost getting my a** kicked because it was my wife that was the one that miked them for me and I was starting to ask her if she was sure. After 20 yrs of marriage I should know by now that you never second guess the woman. :-)


I had that 1 aftermarket plate that you had sent from Barnett I believe it was? I figured if all else failed I could get away using one a bit thicker. But now I should be set. This is an item I like to have with me. Running the higher horsepower is harder on these parts
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/