Anybody know the size of the puller needed for the Pilot Engine flywheel?
Is it 27mm x 1.0 thread pitch? 28mm?

Is it the same as the FL350? If so, I can throw the calipers on it real quick.

FL350 puller has a M27x1.0P LH thread. Measures 26.7mm od and pitch is per my pitch gage.

For the FL400R...I don't have one so I don't know.

But found this via Google search: FL400R flywheel puller thread is M30x1.5P RH.

Here: http://www.rztools.com.tw/?menu=product2&p_id=149&kind_id=8&sub_id=16"%20."window.open(this.href);return%20false;"%20."window.open(this.href);return%20false;"%20."window.open(this.href);return%20false;, saying its M30x1.5P RH thread for the 89-90 Pilot.

And here: http://www.repairmanual.com/online/flywheel-puller-30mm-x-15-rh-external-female-ds-mp8/"%20."window.open(this.href);return%20false;"%20."window.open(this.href);return%20false;"%20."window.open(this.href);return%20false;

No idea what the thread is but if you need to pull a Pilot flywheel I have the Honda puller can send when I get back from Florida.

$29.95 is a steal think mine cost 45.00 from Honda http://www.repairmanual.com/online/flyw ... 0false%3b/
If this info is correct you might try to find one at a local stealer.

Flywheel puller for Suzuki TM/MX Series 125/250/400 all years, TS250 Enduros. Also know to fit LT-F160N Quadrunner models. EARLY DR 4 STROKE MODELS.

FL400 Pilot flywheel puller cross reference

Honda part number is 07KMC-HE00100 ROTOR PULLER
http://www.partzilla.com/parts/detail/h ... MgodiV0AKg
Below are pictures I found on those links just for future reference.

Thanks to you both. I took the bottom end to the little cycle shop down the road and he had it right there, 5 bucks and a cup of coffee. I do need to purchase 1 for future builds so the links are great thanks!!!