OK GUYS HERES WHAT I HAVE.
2 FL350 MACHINES.
ONE MACHINE IS IN RUNNING ORDER. RUNS GREAT DOES NOT HAVE ELECTRIC START. ONLY PULL START. I HAVE THE STARTER motor (( Internal Combustion Engine ? )) AND WIRING THAT WORKS BUT THE SIDE CASE WOULD NEED TO BE REPLACED DUE TO THE EAR THAT SUPPORTS THE STARTER BROKE. THIS MACHINE HAS 2 BRAND NEW OEM AXLES THAT I REPLACED LAST YEAR. MACHINE WAS ONLY RIDDEN ONCE LAST YEAR THERE IS LESS THAN AN HR ON THE BRAND NEW AXLES. AT THAT TIME I ALSO REPLACED THE REAR SHOCKS WITH BRAND NEW OEM ONES. I FOUND THEM AT A LOCAL DEALER THAT HAD THEM STASHED AWAY. I PAID OVER 600 FOR EACH AXLE AND I FORGET WHAT I PAID FOR THE SHOCKS. THIS MACHINE ALSO HAS 2 NEW OEM SHIFT CABLES AND E BRAKE CABLES. TRANSMISSION WORKS FLAWLESSLY I REPLACED THE NEEDLE BEARING IN IT.

MY 2ND MACHINE IS BASICALLY A ROLLING CHASSIS THAT HAS THE motor (( Internal Combustion Engine ? )) TAKEN OUT OF IT. THIS MACHINE HAS A WATER COOLED HEAD AND RADIATOR. I PULLED THE Engine AFTER IT LOST COMPRESSION. THE RINGS NEED TO BE REPLACED ON THIS UNIT AND RE ASSEMBLED. THIS TRANSMISSION HAD THE NEEDLE BEARINGS REPLACED AND ARE FLAWLESS. THIS MACHINE HAS A COMET CLUTCH ON IT WHICH IS 3 YEARS OLD. IT ALSO HAS A SET OF THE WORKS SHOCKS WITH RESERVOIRS. SEAT IS IN EXCELLENT CONDITION.

SPARE PARTS.
COMPLETE Engine WITH HEAD
SPARE SEAT ALMOST BRAND NEW
SPARE FRONT SPINDLES COMPLETE
REAR FENDERS 8 OUT OF 10 NO CRACKS
FLOOR TUB 8 OUT OF 10 NO CRACKS

MACHINES ARE LOCATED IN ALBANY, NY. I WOULD LIKE TO SELL COMPLETE TO SOMEONE FOR AROUND $4000. OBO. IF I DO NOT GET ANY OFFERS FOR THE COMPLETE MACHINES AND SPARE PARTS. THEN I WILL OFFER THE SPARE PARTS ON HERE AND THEN GO ON EBAY. PLEASE FEEL FREE TO EMAIL ME AT JTRETTS20@YAHOO.COM OR JTRETTS20@GMAIL.COM. MY PHONE NUMBER IS 518.TWO85.1222 PLEASE FEEL FREE TO CALL OR TEXT ME. THANKS JEREMY

IF I FIND ANY OTHER PARTS LAYING AROUND. I WILL LIST THEM ON HERE FIRST SO PLEASE FEEL FREE TO EMAIL ME AND ASK ME IF I HAVE ANYTHING AVAILABLE BECAUSE I PROBABLY HAVE IT.

Also if you need any parts please feel free to message me and I may just start parting out depending on the demand for the parts.

whatswithtypinginallcapsmakesitlooklikeallonewordandhurtsmyeyesIcantevenreadwhatyoutyped

sorry. I did not even realize I had the caps on.

Email sent.

Pm sent

Your only 10min from me. I ran across your ad on CL, I havr the other two FLs on CL for sale under Albany. What do you want for the rear fenders picked up?

Are the nerf bars on the chassis FL welded to the frame? Sell the rear Works shocks? May also be interested in thw water cooled head setup if you decide to part out.