Anyone have an extra Pilot head gasket you want to part with?
Thanks in advance,
Nick

I might have one, would now be a good time to upgrade to a copper gasket?

Thank you Hoser, I'd like to install my Speedchaser Cool Head and didnt really know which head gasket I should look for. I was curious if anyone had a Honda gasket they would be willing to part with. I have seen the copper gaskets on ebay but was unsure on the correct thickness I should look for, & don't really want to give up any gains in compression I might get from the cool head. Any and all advice on this would really be appreciated.

Thanks again,
Nick

I buy the Wiseco top end gasket sets, usually you need some if not all of the gaskets it includes at some point you know? Thing is like 34 bucks or something like that off their webpage.I got 1 pretty cheap off Ebay as well recently and just used the head gasket in it.

Stock gasket is about .030 thick you know how much the copper is?

Thank you Mudbogger, I will watch for the Wiseco.

Hoser the copper gasket I saw on ebay was .032 thick.
http://www.ebay.com/itm/HONDA-FL400R-PI ... _500wt_922

Thanks again for your help guys.

I would go with the copper gasket then since its reusable.

Sounds good, I will order one of the copper gaskets.
Thanks again,
Nick