Have a afterthoughtmotorspurts water cooled head 275$

fl350 axles sold

Fl350 trailing arms with links and link mounts 160$

Front j arms 100$

Fl350 stock hubs 45$

Fl350 stock gas tank with pump no cap 75$

Prices can be negotiated need more room and have another project in the way that needs finished first

buyer pays shipping

Rear hubs only

Got a picture of the head?

Does it come with the mounting studs and acorn nuts?

Rand

No studs but everything else

Axles

Splines

Axles are sold. Thanks Jon!

Get that truck done and back on the buggy. There's only like 3-4 of us NW OH / SE MI folks on here!

-Dan A.

For the watrrcooled head if I rember right it takes 85mm long studs?

Thanks Dan enjoy your new toy and I will be back on it fast

Once you find out the length you need you can go here and search for them http://www.partzilla.com/search/?q=STUD+8x85&x=0&y=0

Search for stud 8x85 or what ever length you need you also might want to search for bolt,stud 8x85


Or you can pay aftermuttmotorspurts too much for studs lol

https://www.google.com/#q=stud+8x85

You can get 3' of M8x1.25 threaded rod for under $4-$5, which is prob 1.5 sets of studs. I don't know if that is the right thread/pitch. But I would try that before spending $34.99 + s/h from A/S for the exact same thing! All you need is a hack saw and some type of grinding wheel/disc to dress the leading edges. Chase die wouldn't hurt either (thread it on in between the cut lines before cutting, and chase each cut end).

http://www.grainger.com/product/Threaded-Rod-10P805?opr=APPD&pbi=10P796 $4.54 for Zinc-coated steel
http://www.grainger.com/product/Threaded-Rod-10P796?opr=APPD&pbi=10P805 $3.26 for plain steel

Any one? Shoot some offers