Need parts to complete project or for sale ay the right price
I don't know what's missing has good compression but missing most of the bolts holding drivetrain in

Welcome new guy.
That thing is going to cost a hell of a lot of money to get running reliably.
No offence but that thing is not worth very much. It has been involved in a big crash.
The top cage is bent bad and it looks like someone used a torch to try to straighten it.
It's damaged similar to what mine was and I bet the frame is also bent.
Just my opinion.
CO

Let us know what you need. Hopefully someone can help you out. There's hoards of parts out there (a handful of people own like 95% of the left over parts) and getting this thing running could be a fun project, and a great way of keeping another FL350 from rotting away in someone's back yard.


Welcome to the site.

The picture doesn't tell us much about the drivetrain. It appears the driven clutch may be missing??? Missing brake caliper/rotor? Give us a good clear picture of the drive portion on the left side. I hope this odyssey only cost you a few hundred dollars cause its what I would consider a parts-only machine.

A friend has a nice one I just figured I could piece this together but it seems like it will take alot of work.
I have airbox, carb, expansion pipe, rear caliper, tank.
I need a rear rotor, all bolts for motor (( Internal Combustion Engine ? ))/trans.
I CV is loose.
I'm not sure if bent or not I just bolted it together haphazardly haphazardly. Thanks for the input I had alot of fun with a fl250 years back.