PilotOdyssey.com
http://www.pilotodyssey.com/PO/

fun times in garage
http://www.pilotodyssey.com/PO/viewtopic.php?f=43&t=12002
Page 1 of 1

Author:  adnoh [ Sun Apr 14, 2013 9:57 pm ]
Post subject:  fun times in garage

I had posted some discussion on rppjr Engine so I thought I would go take some pics and video to go along with my ramblings. I mocked up an Engine with out the cases to show the working in degrees of rotation and crank angles. I also took pics of the bench comment of the pilot cylinder. I also took pics of the OEM crushed head gasket. I then took pics of the piston in the cylinder with the cylinder spaced and decked. I even decided to share some pics on the flywheel in degrees as well in relation to the (T) and (F) mark and the piston position. You can see the crank angle as well. Did more however this all I had time to post.

Enjoy the pics and video.

Attachments:
Jug on bench with piston slide inside.JPG
Jug on bench with piston slide inside.JPG [ 96.01 KiB | Viewed 2096 times ]
Jug on bench spaced with piston slide inside.JPG
Jug on bench spaced with piston slide inside.JPG [ 98.12 KiB | Viewed 2096 times ]
Piston at TDC as on case with stock base gasket.JPG
Piston at TDC as on case with stock base gasket.JPG [ 98.59 KiB | Viewed 2096 times ]
Piston above deck as deck was cut.JPG
Piston above deck as deck was cut.JPG [ 66.26 KiB | Viewed 2096 times ]
OEM head gasket crushed thickness.JPG
OEM head gasket crushed thickness.JPG [ 82.16 KiB | Viewed 2096 times ]

Author:  adnoh [ Sun Apr 14, 2013 10:00 pm ]
Post subject:  Re: fun times in garage

more pics

Attachments:
OEM head gasket ID.JPG
OEM head gasket ID.JPG [ 109.5 KiB | Viewed 2094 times ]
Parts mock up.jpg
Parts mock up.jpg [ 87.65 KiB | Viewed 2094 times ]
piston positin at TDC.jpg
piston positin at TDC.jpg [ 99.56 KiB | Viewed 2094 times ]
TDC on wheel clutch side.jpg
TDC on wheel clutch side.jpg [ 112.6 KiB | Viewed 2094 times ]
TDC on mag side (T) mark.jpg
TDC on mag side (T) mark.jpg [ 89.99 KiB | Viewed 2094 times ]

Author:  adnoh [ Sun Apr 14, 2013 10:03 pm ]
Post subject:  Re: fun times in garage

more back yard hacker pics and vids

Attachments:
piston positin at TDC.jpg
piston positin at TDC.jpg [ 99.56 KiB | Viewed 2094 times ]
Piston position  (F) mark.jpg
Piston position (F) mark.jpg [ 114.61 KiB | Viewed 2094 times ]
(F) mark on flywheel.jpg
(F) mark on flywheel.jpg [ 78.14 KiB | Viewed 2094 times ]

Crank angle 1.wmv [ 922.22 KiB | Viewed 2094 times ]

crank angle 2.wmv [ 1.12 MiB | Viewed 2094 times ]

Author:  bullnerd [ Sun Apr 14, 2013 10:12 pm ]
Post subject:  Re: fun times in garage

that's some cool stuff,thanks for sharing.

But the real question is ...how friggin big is that calculator in the backround!? :-)

Author:  adnoh [ Sun Apr 14, 2013 10:34 pm ]
Post subject:  Re: fun times in garage

That is my garage calc I work on my engines with. My eyes are getting bad so I need big numbers and big keys. I use it on every thing. Best darn Christmas present I ever got. It scares most when I break it out and start using it.

Glad you enjoyed them.

Author:  Rppjr [ Mon Apr 15, 2013 12:19 pm ]
Post subject:  Re: fun times in garage

Nice, brings a lot of what you have been talking about into perspective. Nothing beats pictures.
Thanks for sharing.
Bob

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/