PilotOdyssey.com
http://www.pilotodyssey.com/PO/

Measuring & Design of odyssey & pilot rear caliper b
http://www.pilotodyssey.com/PO/viewtopic.php?f=46&t=3873		 Page 2 of 2
Author:  speedchaser [ Fri Feb 08, 2008 9:34 pm ]
Post subject:  New styl steel bracket
Hello had some time to day worked brackets cutting them out of steel.
Changed the design a little. Add some material a round the slider pin holes on the out side. So I could get bronze bushings and rod wiper seals in
http://www.mfpseals.com/category.php?id=132 (Metal Clad Wiper – Nitrile)
This bracket will be rebuild able and will not use the stock
45131-***-006 bolt pins slider bolts $9.05 each
45133-***-006 boots rubber $2.9 each
45112-***-006 RETAINER, BRACKET spring clips $3.16 each no longer available

Replacement parts
2 bronze bushing
4 rod wiper seals
2 custom slider bolts made out of grade 8 allen bolt

Weight is only 1 pond more then stock

Making this bracket out of aluminum is not a good idea with replaceable bushing the cross-sections is too thin and might brake and I don’t need that. This is guts for the rebuild able style bracket.
thanks for looking
speedchaser

Attachments:
File comment: steel burn out
MVC-508X.JPG
MVC-508X.JPG [ 120.08 KiB | Viewed 4740 times ]
File comment: ruffing out first side
MVC-509X.JPG
MVC-509X.JPG [ 91.24 KiB | Viewed 4944 times ]
File comment: added a slot to remove some weight
MVC-510X.JPG
MVC-510X.JPG [ 173.27 KiB | Viewed 4741 times ]
File comment: other side with holes finshed
MVC-511X.JPG
MVC-511X.JPG [ 96.67 KiB | Viewed 4944 times ]
Author:  speedchaser [ Fri Feb 08, 2008 9:40 pm ]
Post subject: 
next pics with bushings and rod wipers
will have some pics of slider bolts soon
note the sider pin hole go all the way thru the bracket.
to keep a good seal and to press out bushing when needed.

Attachments:
File comment: side 2
MVC-512X.JPG
MVC-512X.JPG [ 98.9 KiB | Viewed 4941 times ]
File comment: side 1
MVC-513X.JPG
MVC-513X.JPG [ 105.41 KiB | Viewed 4941 times ]
Author:  speedchaser [ Fri Feb 15, 2008 11:04 am ]
Post subject: 
pic's of new style slider bolt cut out of a grade 12 allen socket head screw
thanks for looking
speedchaser

Attachments:
File comment: last one
MVC-515X.JPG
MVC-515X.JPG [ 100.47 KiB | Viewed 4907 times ]
File comment: next
MVC-516X.JPG
MVC-516X.JPG [ 91.73 KiB | Viewed 4907 times ]
Author:  Stoneman [ Mon Feb 18, 2008 12:15 pm ]
Post subject: 
I installed Speedchasers prototype aluminum bracket on my pilot yesterday. The fit and finish is excellent.
I did have to bend the ears of the wear indicator clip in slightly in order for it to snug up to the bracket. All other clips fit perfect. Bolts up to tranny with no problems.
I will put some miles on it this weekend and report back. :-)

Attachments:
DSC003961.JPG
DSC003961.JPG [ 139.27 KiB | Viewed 4741 times ]
Author:  speedchaser [ Thu Feb 21, 2008 4:23 am ]
Post subject: 
movie's of brake bracket cnc machine
http://www.youtube.com/user/chasemachine
thanks for looking Speedchaser :-) :-) :-)
Author:  hoser [ Thu Feb 28, 2008 10:21 am ]
Post subject: 
Now shipping!

viewtopic.php?t=4011
Page 2 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/