Redneck O-ring Tool
Hello Today we are going to build a simple o-ring Tool out of paper clips and 3/16”brakeline.
We are using the paper chips for the spring wire and the 3/16 brake line for the handle.
I like to use a small paper clip on one end and a lager one on other.
We loop the paper clip so it will not cut the o-ring when we use it for removing o-rings.
Thanks For Looking
SpeedChaser
| Attachments: |
|
File comment: Tool needed brake line cutter
Crimping pliers and wire cutters MVC-715X.JPG [ 126.31 KiB | Viewed 4720 times ] |
|
File comment: cut the brake line aprox 5" or longer
MVC-716X.JPG [ 88.06 KiB | Viewed 4786 times ] |
|
File comment: bend and cut paper clips in a small loop
MVC-717X.JPG [ 95.88 KiB | Viewed 4786 times ] |
|
File comment: pic of small loop
MVC-720X.JPG [ 112 KiB | Viewed 4786 times ] |
|
File comment: slide loops in to ends of brake line
MVC-721X.JPG [ 100.21 KiB | Viewed 4786 times ] |
|
File comment: crimp the ends of brake line
MVC-725X.JPG [ 108.2 KiB | Viewed 4786 times ] |