PilotOdyssey.com http://www.pilotodyssey.com/PO/ |
|
Pilot fl500 http://www.pilotodyssey.com/PO/viewtopic.php?f=5&t=15070 |
Page 2 of 4 |
Author: | hoser [ Thu Dec 04, 2014 3:55 pm ] |
Post subject: | Re: Pilot fl500 |
Someone spent a lot of time personalizing that Pilot. Start another thread and post info on your fiberglass work. Looking at the position of the seat the former owner must have been about 5' tall? |
Author: | rmesser [ Thu Dec 04, 2014 4:08 pm ] | ||
Post subject: | Re: Pilot fl500 | ||
What up with the side panels?
|
Author: | DC [ Thu Dec 04, 2014 4:46 pm ] |
Post subject: | Re: Pilot fl500 |
Looks like the frame has been stretched. Someone put a ton of money into modifying that one for sure. |
Author: | Romain french [ Thu Dec 04, 2014 5:08 pm ] |
Post subject: | Re: Pilot fl500 |
Shocks are "ohlins". I have two pilots and five fl 350. I will do championships and fiber glass are stronger and it can be fixed if necessary. The frame was extended (10cm), that´s the reason why fenders were cut. |
Author: | Romain french [ Thu Jan 15, 2015 3:56 am ] | |||||
Post subject: | Re: Pilot fl500 | |||||
Hi, frame +350 mm. Futur Engine rotax 494 RAVE buy with FARR.
|
Author: | bullnerd [ Thu Jan 15, 2015 5:25 pm ] |
Post subject: | Re: Pilot fl500 |
Wait..wait..wait... You can fab fiberglass...you know how to hob gears...it looks like you can fab and weld tubing pretty good? Why the heck are you buying a simple Engine mount from FARR ? BTW, I like the diagonal, most don't know that's supposed to be the continuous piece. |
Author: | B S [ Thu Jan 15, 2015 5:28 pm ] |
Post subject: | Re: Pilot fl500 |
bullnerd wrote: Wait..wait..wait... You can fab fiberglass...you know how to hob gears...it looks like you can fab and weld tubing pretty good? Why the heck are you buying a simple Engine mount from FARR ? im pretty sure he means he bought the kit ? |
Author: | bullnerd [ Thu Jan 15, 2015 5:30 pm ] |
Post subject: | Re: Pilot fl500 |
B S wrote: bullnerd wrote: Wait..wait..wait... You can fab fiberglass...you know how to hob gears...it looks like you can fab and weld tubing pretty good? Why the heck are you buying a simple Engine mount from FARR ? im pretty sure he means he bought the kit ? Oh yeah, I forgot it comes with an Engine. |
Author: | Romain french [ Fri Jan 16, 2015 4:43 pm ] |
Post subject: | Re: Pilot fl500 |
Hi, Yes i bought a complet kit at FARR (Engine too). Its cheaper than in France. I do all those tranformations on the machine so that it suits the championship rules. I extended it for a better road holding. |
Author: | emmanuel farrugia [ Sun Jan 25, 2015 8:36 am ] |
Post subject: | Re: Pilot fl500 |
I hate to be the bearer of bad news but im pretty sure the exhaust is going to hit that diagonal brace on the roll cage, would have been better the other direction but either way I would wait for the parts to arrive to check the clearence |
Author: | Romain french [ Sun Feb 08, 2015 8:50 am ] | |||
Post subject: | Re: Pilot fl500 | |||
Hi, i received the Engine from FARR, very nice job, very nice kit. I need help to assemby the differents components, can you tell me how plug to in different things Tanking you in advance,
|
Author: | Romain french [ Sun Feb 08, 2015 8:53 am ] | |||||
Post subject: | Re: Pilot fl500 | |||||
Connecting regular?
|
Author: | Romain french [ Sun Feb 08, 2015 8:53 am ] | ||
Post subject: | Re: Pilot fl500 | ||
What this?
|
Author: | Romain french [ Sun Feb 08, 2015 8:55 am ] | ||
Post subject: | Re: Pilot fl500 | ||
Where connecting this (b/w), it s stop Engine? Connecting to "-" or "+" ?
|
Author: | Romain french [ Sun Feb 08, 2015 8:57 am ] | ||
Post subject: | Re: Pilot fl500 | ||
This assembly is it good?
|
Author: | Romain french [ Sun Feb 08, 2015 8:58 am ] | ||
Post subject: | Re: Pilot fl500 | ||
?
|
Author: | Romain french [ Sun Feb 08, 2015 8:59 am ] | ||
Post subject: | Re: Pilot fl500 | ||
?
|
Author: | Romain french [ Sun Feb 08, 2015 9:03 am ] |
Post subject: | Re: Pilot fl500 |
Hi, Can you tell me wether it´s better to keep the oil pump or to pour the oil directly in the fuel tank? |
Author: | hoser [ Sun Feb 08, 2015 9:20 am ] |
Post subject: | Re: Pilot fl500 |
Romain french wrote: This assembly is it good? ? is I believe the port for the fuel pump, the fuel pump is built into the carb on the watercraft carbs no external fuel pump required. |
Author: | hoser [ Sun Feb 08, 2015 9:22 am ] |
Post subject: | Re: Pilot fl500 |
Romain french wrote: ? Port on the crank case is hooked to your fuel pump. Bad picture cant see what the other ? is pointing too. |
Author: | hoser [ Sun Feb 08, 2015 9:23 am ] |
Post subject: | Re: Pilot fl500 |
Romain french wrote: ? You have no idea how to hook up bleed and test the oil pump I would premix the oil with the gas and remove the oil pump and block it off with a plate. |
Author: | hoser [ Sun Feb 08, 2015 9:26 am ] |
Post subject: | Re: Pilot fl500 |
Romain french wrote: Hi, i received the Engine from FARR, very nice job, very nice kit. I need help to assemby the differents components, can you tell me how plug to in different things Tanking you in advance, Where are the power valves? This Engine arrive unsealed? How are you keeping the moisture and dirt out of the power valve openings, exhaust ports, spark plug holes and the hole that goes directly into your crankcase where all your bearings are trying to suck in moisture so they can rust up? |
Author: | B S [ Sun Feb 08, 2015 3:07 pm ] |
Post subject: | Re: Pilot fl500 |
Romain french wrote: This assembly is it good? no you link the fuel line tougher for the carbs and you don't need a fuel pump the carbs have one built into them ill get a photo to show you |
Author: | B S [ Sun Feb 08, 2015 3:20 pm ] |
Post subject: | Re: Pilot fl500 |
you will want one of these http://www.ebay.com/itm/MIKUNI-SBN-SUPE ... d7&vxp=mtr the chokes are crap on those carbs they don't pull fuel that's why everyone uses this i would personally ditch the oil pump just remove it plus you know your fuel is properly mixed |
Author: | Romain french [ Sun Feb 08, 2015 3:56 pm ] |
Post subject: | Re: Pilot fl500 |
hoser wrote: Romain french wrote: Hi, i received the Engine from FARR, very nice job, very nice kit. I need help to assemby the differents components, can you tell me how plug to in different things Tanking you in advance, Where are the power valves? This Engine arrive unsealed? How are you keeping the moisture and dirt out of the power valve openings, exhaust ports, spark plug holes and the hole that goes directly into your crankcase where all your bearings are trying to suck in moisture so they can rust up? I already have the RAVE but there are not on the picture. |
Page 2 of 4 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |