After reading a few threads on here I decided that I wanted to upgrade the front brakes. I sourced TRX450 uprights + associated parts (not easy as I am UK based), had to also buy new wheels to fit over the TRX brakes.

The brakes are now 10x better - can't wait to take it out for a serious play.


IMG_2618

IMG_2603

IMG_2607

IMG_2604

IMG_2608

That's a sexy set up.
Looks like those brakes will stop a F1 car.
On a side note why does your main roll bar only have one bolt on each side holding it ??
That's very dangerous in my opinion.

Are you still using the stock a-arms and ball joint with those trx uprights and hubs? It was mentioned to me that without modifications adding the trx items would leave the tires off camber like \ /.

I you look close he has n adjustable upper balljoint at the very least

I see that now. I wonder if he just modified the stock arms because they look very similar.

Probably exactly what he did. Would not be too difficult to accomplish as long as you get everything set up straight