PilotOdyssey.com
http://www.pilotodyssey.com/PO/

fl350 burn project
http://www.pilotodyssey.com/PO/viewtopic.php?f=5&t=16892
Page 1 of 3

Author:  jknarfal [ Wed Aug 10, 2016 10:46 am ]
Post subject:  fl350 burn project

picked this up last night. a $350 craigslist find. ive been looking for a 350 to pick up cheap for my step son. this will be a great project for him and i to do together. i believe i have just about everything this poor thing needs. hard to tell but it was super clean before the burn. the plastics had no sun damage and the seat was still bright blue with no cracks. too bad its all melted now. i will have to hunt down a wiring harness and starter solenoid with the battery cables. the Engine feels like it has compression. but i didnt pull it very hard. i didnt want to suck crap into the Engine.

Attachments:
imagejpeg_1.jpg
imagejpeg_1.jpg [ 60.54 KiB | Viewed 27569 times ]
imagejpeg_0_11.jpg
imagejpeg_0_11.jpg [ 78.57 KiB | Viewed 27569 times ]
IMAG3869.jpg
IMAG3869.jpg [ 59.58 KiB | Viewed 27569 times ]
IMAG3870.jpg
IMAG3870.jpg [ 57.1 KiB | Viewed 27569 times ]
IMAG3871.jpg
IMAG3871.jpg [ 29.85 KiB | Viewed 27569 times ]
IMAG3874.jpg
IMAG3874.jpg [ 63.28 KiB | Viewed 27569 times ]

Author:  jknarfal [ Wed Aug 10, 2016 10:48 am ]
Post subject:  Re: fl350 burn project

more pictures

Attachments:
IMAG3875.jpg
IMAG3875.jpg [ 62.39 KiB | Viewed 27567 times ]
IMAG3876.jpg
IMAG3876.jpg [ 59.77 KiB | Viewed 27567 times ]
IMAG3877.jpg
IMAG3877.jpg [ 58.07 KiB | Viewed 27567 times ]
IMAG3879.jpg
IMAG3879.jpg [ 47.49 KiB | Viewed 27567 times ]
IMAG3880.jpg
IMAG3880.jpg [ 37.75 KiB | Viewed 27567 times ]
IMAG3881.jpg
IMAG3881.jpg [ 32 KiB | Viewed 27567 times ]

Author:  jknarfal [ Wed Aug 10, 2016 10:50 am ]
Post subject:  Re: fl350 burn project

and more

Attachments:
IMAG3882.jpg
IMAG3882.jpg [ 46.14 KiB | Viewed 27567 times ]
IMAG3884.jpg
IMAG3884.jpg [ 64.73 KiB | Viewed 27567 times ]
IMAG3885.jpg
IMAG3885.jpg [ 44 KiB | Viewed 27567 times ]
IMAG3886.jpg
IMAG3886.jpg [ 30.96 KiB | Viewed 27567 times ]

Author:  rmesser [ Wed Aug 10, 2016 10:51 am ]
Post subject:  Re: fl350 burn project

So what Is the story with the fire? any details? Nice find.

Author:  jknarfal [ Wed Aug 10, 2016 11:01 am ]
Post subject:  Re: fl350 burn project

Apparently it was in a garage that caught fire. From what I was told they guy pirty much lost everything in that garage. Including a quad. The guy I bought it from got it from his boss who had the fire. The original owner had this listed on craigslist several months back for $3000. I remember coming across it. I also got 3 good Douglas wheels. And all 4 stock wheels burnt up. But are very straight. No dents no rash. I'll sand blast them and see how they come out. And one good front sand tire.

Author:  New To Odesseys [ Wed Aug 10, 2016 1:54 pm ]
Post subject:  Re: fl350 burn project

That pretty horrible hope you can we do it and make her pretty again!

Author:  stix [ Wed Aug 10, 2016 8:32 pm ]
Post subject:  Re: fl350 burn project

Ok now I get it, it was in a garage fire. I was gonna say that looked a revenge arson fire to me, lol

Author:  VanelayIndustries [ Wed Aug 10, 2016 9:54 pm ]
Post subject:  Re: fl350 burn project

All i see are dollar signs when i look at that...id part it out and be half way to a decent one

Author:  jknarfal [ Wed Aug 10, 2016 11:00 pm ]
Post subject:  Re: fl350 burn project

I see more parts available online from people than clean complete machines. I have almost every part to fix this already. I'll have less than $500 into it. And more room in my garage from spare parts. But most importantly its going to make a 10year old very very happy.

Author:  DMoneyAllstar [ Thu Aug 11, 2016 10:48 am ]
Post subject:  Re: fl350 burn project

Pretty sure I have a couple full harnesses plus more in a big tote. I can dig them out and snap some pics if interested. Cheap.

Author:  jknarfal [ Thu Aug 11, 2016 11:44 am ]
Post subject:  Re: fl350 burn project

Yes I would be! Thank you.

Author:  jknarfal [ Sun Aug 14, 2016 9:42 pm ]
Post subject:  Re: fl350 burn project

He's got it tore down pirty far already. She only had 80psi of compression. Pulled the jug. It'll need a piston. It's on the stock bore. Picked up some neon green paint. This is one happy kid.

Attachments:
1471224920305.jpg
1471224920305.jpg [ 91.24 KiB | Viewed 27474 times ]

Author:  canadian oddy [ Mon Aug 15, 2016 12:07 am ]
Post subject:  Re: fl350 burn project

jknarfal wrote:
This is one happy kid.


Yes it looks like he is. He's a lucky kid.
When I was around thirteen I wanted a new bicycle. My old man to me to get a job.

Author:  bugeye59 [ Mon Aug 15, 2016 2:12 am ]
Post subject:  Re: fl350 burn project

Great to see such a happy kid...Happy as a Pig in .... :-)
You've got your money$ worth right there so far.Good on ya Dad.Hope his legs grow. :-)

My first 2 wheeler was called a Brickpack barrow,had adjustable forks in the front to pickup the brick straps,4 to a pack.
Also then Dad got me a single wheeler called a wheel barrow.All the other kids bikes could only carry them,mine could carry them AND their bikes!
SO lucky to be a Brickies son! Image

Author:  jknarfal [ Mon Aug 15, 2016 9:45 am ]
Post subject:  Re: fl350 burn project

I actually had a powerwheels odyssey. I'll try to find a picture of it. He's got a ttr50 now. But he's getting a little big for that.

Author:  bullnerd [ Mon Aug 15, 2016 10:22 am ]
Post subject:  Re: fl350 burn project

Yeah, that's a great picture!

Author:  methodical [ Tue Aug 16, 2016 6:42 am ]
Post subject:  Re: fl350 burn project

Just Plain Awesome! The look on your sons face is what truly makes it all worth it! You're a good dude... err dad..LOL

Author:  jknarfal [ Tue Aug 16, 2016 5:24 pm ]
Post subject:  Re: fl350 burn project

Thanks! He's doing much better at this than I expected. Anything I can do to keep him away from those damn video games! It's good to see him excited about something outdoors.

Author:  canadian oddy [ Fri Aug 19, 2016 12:17 am ]
Post subject:  Re: fl350 burn project

jknarfal wrote:
Thanks! He's doing much better at this than I expected. Anything I can do to keep him away from those damn video games! It's good to see him excited about something outdoors.


After it's done he needs a fishing rod and a gun. The perfect childhood :-) .

Author:  jknarfal [ Wed Aug 31, 2016 4:25 pm ]
Post subject:  Re: fl350 burn project

Did some sand blasting today. Got most of the frame done. Found a crack that needs welding.

Attachments:
1472674996119.jpg
1472674996119.jpg [ 111.58 KiB | Viewed 27377 times ]

Author:  bullnerd [ Wed Aug 31, 2016 6:07 pm ]
Post subject:  Re: fl350 burn project

Dude! Is that your backyard? :-)

Author:  jknarfal [ Wed Aug 31, 2016 6:56 pm ]
Post subject:  Re: fl350 burn project

Nope my work. Semi truck dismantling. We have over 12 acres of parts. Hundreds of trucks

Author:  canadian oddy [ Wed Aug 31, 2016 6:58 pm ]
Post subject:  Re: fl350 burn project

jknarfal wrote:
Nope my work. Semi truck dismantling. We have over 12 acres of parts. Hundreds of trucks


Rats -- wish I lived near you -- need a steering box and pump so I can build a better pipe bender.

Author:  jknarfal [ Wed Aug 31, 2016 7:00 pm ]
Post subject:  Re: fl350 burn project

Here are some more pics.

Attachments:
1472684228040.jpg
1472684228040.jpg [ 63.22 KiB | Viewed 27367 times ]
1472684384420.jpg
1472684384420.jpg [ 84.88 KiB | Viewed 27367 times ]

Author:  jknarfal [ Sat Sep 03, 2016 9:07 pm ]
Post subject:  Re: fl350 burn project

Did some more on this today. Welded up all the holes they had for the vinal sides. Also repaired the crack in the frame. I also added another tube on ether side to help prevent more cracks. I've noticed several machines with cracks in this area. I will probably have to modify the skid plate. Tomorrow PAINT!

Attachments:
1472950662342.jpg
1472950662342.jpg [ 54.5 KiB | Viewed 27346 times ]
1472950723566.jpg
1472950723566.jpg [ 55.33 KiB | Viewed 27346 times ]
1472950807633.jpg
1472950807633.jpg [ 38.16 KiB | Viewed 27346 times ]

Page 1 of 3 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/