sucks having to redo some things. but glad it worked out for the most part.

driving angry, hahaha best way to blow off some steam lol.

So I know you need to create a little more clearance when you swap out an Engine. I do like Farr's frame mod kit: https://www.farr-offroad.com/framemodinstructions.htm


I didnt like how the cross tube was cut by the previous owner in front of my recoil. So I decided to make something of my own. I used "Meziere CE13 1-1/8" x 0.083" Weld-In Clevis." It fits the inside of the tube perfectly, and I used 1" wide, 3/16'' bar. There is a gap in the clevis, I will eventually fill that in with a spacer and weld.

have you tested again since you last posted..curious if it all worked out for you