PilotOdyssey.com
http://www.pilotodyssey.com/PO/

farr 583 conversion kit Questions
http://www.pilotodyssey.com/PO/viewtopic.php?f=5&t=17626
Page 1 of 1

Author:  AS-moggy [ Wed Sep 20, 2017 12:18 am ]
Post subject:  farr 583 conversion kit Questions

Starting on the install in to my FL350 and i have just about worked out the brakes for the Engine mount but not sure about the 2 parts in the picture. Also what extra bolts do i need?

Attachments:
P1060924.JPG
P1060924.JPG [ 169.16 KiB | Viewed 877 times ]

Author:  Trackburger [ Wed Oct 04, 2017 1:58 pm ]
Post subject:  Re: farr 583 conversion kit Questions

These spacers are for the driven clutch so it will align with the Rotax drive clutch.

Remove your driven clutch and install the spacer with the larger ID hole on the shaft. Re-install driven clutch and put the small spacer in the cavity formed where the clutch bolt head goes. Install driven clutch bolt and torque... good to go.

Author:  AS-moggy [ Sun Oct 08, 2017 2:20 am ]
Post subject:  Re: farr 583 conversion kit Questions

oh that explains it, thank you very much for your help

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/