Can anybody reccomend a good liquid cool setup for my fl350? i've been rebuilding a burnt (litterally) 350 and would like to get some sort of setup. Any suggestions or tips?

viewtopic.php?f=5&t=5853 heres what i did to mine.there are a few other people who have done simalar set ups to there machines.hope this helps jim

If I could choose any head, it would be a Hillside Honda head. Have mine setup with a CX500 radiator on thermosiphon only and it has been pretty good. Temps usually below 200. With a pump I bet it would run much cooler. post this over in the tech section and you will get more feedback I suspect.

I have used the RAND brand of a water cooled head for years with no issues.They can be purchased off Ebay for around 300 bucks give or take.There are alot of mguys running water pumps, and radiators from Honda Goldwings are usually 20 bucks on Ebay and they come with Fans as well pre-wired. Water pumps vary in maker, and mount locations so I recommend doing a search here for water colled systems.

viewtopic.php?f=1&t=8476&p=74482#p74482

there is a great picture of the HONDA GOLDWING radiaitor in a 350 for you to gauge for your ride.