PilotOdyssey.com
http://www.pilotodyssey.com/PO/

1970 ct-70 aka mini trail 70 project
http://www.pilotodyssey.com/PO/viewtopic.php?f=61&t=11378		 Page 1 of 1
Author:  B S [ Sun Dec 30, 2012 1:55 pm ]
Post subject:  1970 ct-70 aka mini trail 70 project
Well I finally have some time to work on my ct 70 project

I'm starting with the Engine first
Image
Author:  Redheadedjosh [ Sun Dec 30, 2012 1:59 pm ]
Post subject:  Re: 1970 ct-70 aka mini trail 70 project
Awesome post some pics!
We are also in the middle of one. What year is yours and does it have the clutch?
Author:  B S [ Sun Dec 30, 2012 3:15 pm ]
Post subject:  Re: 1970 ct-70 aka mini trail 70 project
Redheadedjosh wrote:
Awesome post some pics!
We are also in the middle of one. What year is yours and does it have the clutch?

1970 model H aka the clutch model

Working on getting Picts up

What year is urs ?
Author:  Redheadedjosh [ Sun Dec 30, 2012 3:33 pm ]
Post subject:  Re: 1970 ct-70 aka mini trail 70 project
sweet we have the same model and year!!! i believe its my fathers. I have a 82 oddy and a 1970 ct90. he has the ct70 and atc70.

Attachments:
IMG_2050.JPG
IMG_2050.JPG [ 102.25 KiB | Viewed 4689 times ]
Author:  B S [ Sun Dec 30, 2012 3:44 pm ]
Post subject:  Re: 1970 ct-70 aka mini trail 70 project
What state u in?
Author:  Redheadedjosh [ Sun Dec 30, 2012 3:45 pm ]
Post subject:  Re: 1970 ct-70 aka mini trail 70 project
B S wrote:
What state u in?


Ha alabama gulf coast
I need some help with my oddy shes a pain in the ass compared to my bike
the 70 had been threw bunch of salt water

She ran too!!! little cleaning and oil she ran!!! hondas don't stop
Author:  B S [ Sun Dec 30, 2012 11:30 pm ]
Post subject:  Re: 1970 ct-70 aka mini trail 70 project
top end was pulled by a local motorcycle shop costumer didn't pay for the top end removal
i got it by lean sale
i've had an 88cc kit sitting for a while not doing any thing so now i have a use for it
plus honda wanted $78 for a piston kit



the Engine how i got it
Image
pulled the clutch and gears to get to the oil pump
Image
oil pump off
Image
removing the studd to drill out the oil hole with a 2mm drill
Image
drilled out and cleaned
Image
new pump
Image
clutch and oil screen back in
Image
new case gasket
Image
new case bolts
Image
put side on temporary
Image
Author:  B S [ Mon Dec 31, 2012 12:04 am ]
Post subject:  Re: 1970 ct-70 aka mini trail 70 project
i put the whole top end tougher
didn't get a photo

look at the dome on this piston
Image

i just need to order new oil seals for the kick,shift and clutch lever

i need to go threw my parts bins to get new caps as these are striped
Image

parts
Image
Author:  B S [ Mon Dec 31, 2012 12:16 am ]
Post subject:  Re: 1970 ct-70 aka mini trail 70 project
i already did the head at an previous date
de carbonized the head, lapped the valves,new valve seal inspected the cam and rockers then washed it before reassembling it
to test the valves i used brake clean and checked for leaks there were none :-)


all i got to get for the Engine now is the oil seals and its done

off to the carb tomorrow



i got a nice parts list already:
new chain
sprokets
throttle cable
clutch cable /got
air filter/got
carb rebuild/got
carb stuffer kit/got
tires???
fuel line/have
fuel filters
brake cable?
Author:  B S [ Mon Dec 31, 2012 11:49 pm ]
Post subject:  Re: 1970 ct-70 aka mini trail 70 project
Image
Author:  pilotscott [ Wed Jan 02, 2013 1:17 pm ]
Post subject:  Re: 1970 ct-70 aka mini trail 70 project
I'm in the middle of doing a 1974 z50

Attachments:
image.jpg
image.jpg [ 60.44 KiB | Viewed 4640 times ]
Author:  B S [ Wed Jan 02, 2013 1:30 pm ]
Post subject:  Re: 1970 ct-70 aka mini trail 70 project
pilotscott wrote:
I'm in the middle of doing a 1974 z50


U redo the Engine?
Author:  pilotscott [ Wed Jan 02, 2013 1:45 pm ]
Post subject:  Re: 1970 ct-70 aka mini trail 70 project
No, I was lucky enough to get a true barn find. The original tires were still in perfect condition and the motor (( Internal Combustion Engine ? )) runs great. I bought it off the original owner and it has been sitting since 92.(Photo is the day I picked it up) I replaced all the Engine seals though and every gasket except for the center cases. I had every colored steel piece powder coated the original color and every piece of plated /chrome steel is at the platers. I also have the tank, forks and side cover being repainted. I even had the side covers coated so they match the wheels. I purchased all new cables, all new decals and all new rubber. Also bought new tires, tubes, and a chain. So far it's coming together really nice. Not looking forward to putting on the new tank decals. Basically every part that I can replace that needs replacing will be restored or replaced. I am trying desperately not to use anything but Honda OEM parts. The only part I have not been able to find yet is the cover for the original air cleaner. When I am all done, I will probably put a 88cc kit with a manual clutch on it just for giggles but I will keep the original stuff. I used to have a CT70 and wish I never sold it.

Attachments:
z502.jpg
z502.jpg [ 82.38 KiB | Viewed 4634 times ]
z501.jpg
z501.jpg [ 88.46 KiB | Viewed 4634 times ]
P6030084.JPG
P6030084.JPG [ 70.14 KiB | Viewed 4628 times ]
Author:  B S [ Fri Jan 04, 2013 12:40 am ]
Post subject:  Re: 1970 ct-70 aka mini trail 70 project
pilotscott wrote:
No, I was lucky enough to get a true barn find. The original tires were still in perfect condition and the motor (( Internal Combustion Engine ? )) ((Internal Combustion Engine?)) runs great. I bought it off the original owner and it has been sitting since 92.(Photo is the day I picked it up) I replaced all the Engine seals though and every gasket except for the center cases. I had every colored steel piece powder coated the original color and every piece of plated /chrome steel is at the platers. I also have the tank, forks and side cover being repainted. I even had the side covers coated so they match the wheels. I purchased all new cables, all new decals and all new rubber. Also bought new tires, tubes, and a chain. So far it's coming together really nice. Not looking forward to putting on the new tank decals. Basically every part that I can replace that needs replacing will be restored or replaced. I am trying desperately not to use anything but Honda OEM parts. The only part I have not been able to find yet is the cover for the original air cleaner. When I am all done, I will probably put a 88cc kit with a manual clutch on it just for giggles but I will keep the original stuff. I used to have a CT70 and wish I never sold it.

damm shes nice

where u been getting the parts?
Author:  pilotscott [ Sat Jan 05, 2013 1:54 pm ]
Post subject:  Re: 1970 ct-70 aka mini trail 70 project
I'm getting them from a guy in Texas. I'm in Anaheim for the AMA Supercross opener and won't be back until tomorrow then I can tell you the company
Author:  B S [ Sat Jan 05, 2013 4:34 pm ]
Post subject:  Re: 1970 ct-70 aka mini trail 70 project
pilotscott wrote:
I'm getting them from a guy in Texas. I'm in Anaheim for the AMA Supercross opener and won't be back until tomorrow then I can tell you the company

Probally Dr atv

I get mine from a friend so cheaper for me :-)
Author:  B S [ Sun Jan 06, 2013 2:10 am ]
Post subject:  Re: 1970 ct-70 aka mini trail 70 project
had to fix the exhaust
Image

all done

Image
Author:  pilotscott [ Sun Jan 06, 2013 9:06 pm ]
Post subject:  Re: 1970 ct-70 aka mini trail 70 project
CHP Motorsports in TX is where I got quite a few items.
Author:  Fatcat [ Mon Jan 07, 2013 12:16 am ]
Post subject:  Re: 1970 ct-70 aka mini trail 70 project
How's she run?
Author:  B S [ Mon Jan 07, 2013 12:40 am ]
Post subject:  Re: 1970 ct-70 aka mini trail 70 project
Fatcat wrote:
How's she run?


good

it needs an speedo cable and an tail light lens other than than that she's good
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/