PilotOdyssey.com
http://www.pilotodyssey.com/PO/

Crankcase seal Double spring
http://www.pilotodyssey.com/PO/viewtopic.php?f=64&t=14782		 Page 1 of 1
Author:  birvin [ Sun Sep 14, 2014 11:19 am ]
Post subject:  Crankcase seal Double spring
I rebuilt my Engine a few months ago and installed a new double lip/spring and o-ring, but it wasn't that long and it was leaking. I checked it and it wasn't seating correctly on the steel bushing (for a better word) so I fixed that and reinstalled it. It passed a leak down test just like before so I ran it. Well I am having the same problem again, it past a leak down test again but I have contaminant's in my crank case. I started looking for a alternate place for one and this is what I came up with. http://seals.mspseals.com/item/all-cate ... nformation Has anyone dealt with this place before? If so let me know good or bad please. Thanks Billy
Author:  canadian oddy [ Sun Sep 14, 2014 1:15 pm ]
Post subject:  Re: Crankcase seal Double spring
birvin wrote:
I rebuilt my Engine a few months ago and installed a new double lip/spring and o-ring, but it wasn't that long and it was leaking. I checked it and it wasn't seating correctly on the steel bushing (for a better word) so I fixed that and reinstalled it. It passed a leak down test just like before so I ran it. Well I am having the same problem again, it past a leak down test again but I have contaminant's in my crank case. I started looking for a alternate place for one and this is what I came up with. http://seals.mspseals.com/item/all-cate ... nformation Has anyone dealt with this place before? If so let me know good or bad please. Thanks Billy


Looks legit. Give them a call or email.
If they have the seal great, then we have another supplier in our neck of the woods. If not then you got to get the seal from England.
Author:  birvin [ Sun Sep 14, 2014 1:54 pm ]
Post subject:  Re: Crankcase seal Double spring
canadian oddy wrote:
birvin wrote:
I rebuilt my Engine a few months ago and installed a new double lip/spring and o-ring, but it wasn't that long and it was leaking. I checked it and it wasn't seating correctly on the steel bushing (for a better word) so I fixed that and reinstalled it. It passed a leak down test just like before so I ran it. Well I am having the same problem again, it past a leak down test again but I have contaminant's in my crank case. I started looking for a alternate place for one and this is what I came up with. http://seals.mspseals.com/item/all-cate ... nformation Has anyone dealt with this place before? If so let me know good or bad please. Thanks Billy


Looks legit. Give them a call or email.
If they have the seal great, then we have another supplier in our neck of the woods. If not then you got to get the seal from England.

I am going to call them tomorrow, but their site said they had it. That's why I plan on calling and making sure! I will post what they say about it. Thanks Billy
Author:  canadian oddy [ Sun Sep 14, 2014 1:59 pm ]
Post subject:  Re: Crankcase seal Double spring
birvin wrote:
canadian oddy wrote:
birvin wrote:
I rebuilt my Engine a few months ago and installed a new double lip/spring and o-ring, but it wasn't that long and it was leaking. I checked it and it wasn't seating correctly on the steel bushing (for a better word) so I fixed that and reinstalled it. It passed a leak down test just like before so I ran it. Well I am having the same problem again, it past a leak down test again but I have contaminant's in my crank case. I started looking for a alternate place for one and this is what I came up with. http://seals.mspseals.com/item/all-cate ... nformation Has anyone dealt with this place before? If so let me know good or bad please. Thanks Billy


Looks legit. Give them a call or email.
If they have the seal great, then we have another supplier in our neck of the woods. If not then you got to get the seal from England.

I am going to call them tomorrow, but their site said they had it. That's why I plan on calling and making sure! I will post what they say about it. Thanks Billy


Ask them about the 8mm size (stock) instead of the 11mm.
England only had the 11mm.
Even though it's 3mm bigger than stock seal I have had no issues yet.
Author:  birvin [ Sun Sep 14, 2014 2:55 pm ]
Post subject:  Re: Crankcase seal Double spring
canadian oddy wrote:
birvin wrote:
canadian oddy wrote:
birvin wrote:
I rebuilt my Engine a few months ago and installed a new double lip/spring and o-ring, but it wasn't that long and it was leaking. I checked it and it wasn't seating correctly on the steel bushing (for a better word) so I fixed that and reinstalled it. It passed a leak down test just like before so I ran it. Well I am having the same problem again, it past a leak down test again but I have contaminant's in my crank case. I started looking for a alternate place for one and this is what I came up with. http://seals.mspseals.com/item/all-cate ... nformation Has anyone dealt with this place before? If so let me know good or bad please. Thanks Billy


Looks legit. Give them a call or email.
If they have the seal great, then we have another supplier in our neck of the woods. If not then you got to get the seal from England.

I am going to call them tomorrow, but their site said they had it. That's why I plan on calling and making sure! I will post what they say about it. Thanks Billy


Ask them about the 8mm size (stock) instead of the 11mm.
when I goggled it that is what I checked on the proper size. Thanks Billy
England only had the 11mm.
Even though it's 3mm bigger than stock seal I have had no issues yet.
Author:  canadian oddy [ Mon Sep 15, 2014 2:54 pm ]
Post subject:  Re: Crankcase seal Double spring
Anything on this yet birvin ???
Author:  birvin [ Mon Sep 15, 2014 9:23 pm ]
Post subject:  Re: Crankcase seal Double spring
canadian oddy wrote:
Anything on this yet birvin ???

I called today and they were in a meeting, I will call them back in the morning. Thanks Billy
Author:  canadian oddy [ Thu Sep 18, 2014 2:55 pm ]
Post subject:  Re: Crankcase seal Double spring
Anything on this yet birvin ???
Author:  birvin [ Thu Sep 18, 2014 9:07 pm ]
Post subject:  Re: Crankcase seal Double spring
canadian oddy wrote:
Anything on this yet birvin ???

Ok I finally got the word on the seal. They will make the seals but it will take about 100 min. order for tooling up. He guaranties them to meet oem specs. He also wants me to send him one so he can have the original numbers to look up specs. It will be a exact match, but I don't have a seal to send him. so If anyone has one that the info can be read from I will send it to him and then we can get the cost. If anyone else is interested shoot me a message and I will give you my address. CO you probably have a few of them. LOL Thanks Billy
Author:  canadian oddy [ Thu Sep 18, 2014 10:59 pm ]
Post subject:  Re: Crankcase seal Double spring
birvin wrote:
canadian oddy wrote:
Anything on this yet birvin ???

Ok I finally got the word on the seal. They will make the seals but it will take about 100 min. order for tooling up. He guaranties them to meet oem specs. He also wants me to send him one so he can have the original numbers to look up specs. It will be a exact match, but I don't have a seal to send him. so If anyone has one that the info can be read from I will send it to him and then we can get the cost. If anyone else is interested shoot me a message and I will give you my address. CO you probably have a few of them. LOL Thanks Billy


A group buy has come up before here but I don't think we need a hundred of them as the uk seals work just fine
Author:  canadian oddy [ Thu Sep 18, 2014 11:03 pm ]
Post subject:  Re: Crankcase seal Double spring
Looks like they are like all the rest of the business, they don't want to stock nothing and then charge the shit out of you to make up a bunch that you have to sell to get your money back.
Author:  birvin [ Fri Sep 19, 2014 5:58 pm ]
Post subject:  Re: Crankcase seal Double spring
canadian oddy wrote:
Looks like they are like all the rest of the business, they don't want to stock nothing and then charge the shit out of you to make up a bunch that you have to sell to get your money back.

Yea I think so. I understand that they are in the business of making money and I have no idea what time, man hrs. it takes to do the process. With that being said I'm okay with it. May as well be,I can't make them....LOL I am about to start a new thread about the seal that I have been pondering on and I think I have came up with a idea. Thanks Billy
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/