Joined: Tue Jan 17, 2012 3:19 am Posts: 7788 Location: Hope, B.C Canada
|
Welcome
Fl350 rear caliper 1) The dust seal is no longer available -- item 5 in pic 2) The square main seal you can get at Honda. It is from a 1981 CB750K #45215-533-004 -- that's item 10 in pic 3) The small o-ring you can still get from Honda: o-ring: 91358-964-006 -- item 28 in pic 4) The outside boot is a 2000 Chevy rear wheel cylinder boot fits great for a replacement parking brake boot -- picture below item 21 in the pic
Please note that these parts were still available a couple of years ago. Also I do not run the dust seal because you can't get one and all 3 of my machines have no issues. You don't need it. Bleeding the brakes will be a pain in the azz so make sure your master cylinder is in good shape. CO
Edit: start a new thread in the tech section for this issue. CO
Attachments: |
File comment: This is the outside boot it's a chevy wheel cylinder boot. Apparently it fits but I have never needed one
FL350 brake boot.png [ 605.92 KiB | Viewed 25767 times ]
|
rear brake caliper.jpg [ 93.21 KiB | Viewed 25767 times ]
|
|
|