Thanks mate.Pitty your not closer,I'd drop in and do the DC brake for you on your Ody.But 4,000km just a tad too far.
I would do it different for you tho by using your Park/E brake Handle to pull/activate on the DC brake lever.
I would add a short cable at the end of the Ody OEM park brake cable to pull the DC brake lever,eliminating the need for a separate hand lever off the FNR gear shifter.
Also it could be done via an electric 12v pull or push solenoid depending on the mounting orientation.
This way a simple button could be added to the FNR gear knob for a quick and easy 1 handed grindle$$ gear change.
Could also just use the solenoid with the brake rubber only fitted to the plunger pushing on the DC side edge.This would be standalone eliminating everything else ie the lever,wire cable,hand brake levers etc.Just a 12v solenoid,wireing,mount and gear button.