i am looking to get a water cooled head for my odyssey fl350 so i sent am email to hill top honda. this is the reply i got. i could use 2 and was wondering if there is anyone else interested to get an order of at least 4. thank you

Jason,
Right now I have no heads in stock. I am telling people that if I can get 4 serious orders I will put my new version of the head into production. I have the program ready to go but with the price of aluminum and the time it takes to set my CNC machine up to run the heads, it is not cost effective to make them without at least 4 or more on order. That being said, when I get enough orders:

They will be $375 plus shipping. The 3.0 will not have a removable dome as the previous version did, as I have not seen enough want/care for this. It simplifies production without it and brings the cost down. The heads will be 2 piece billet 6061 aluminum. The domes will be cut to the compression of your choosing. Normally set up for about 160-165 PSI depending on the cylinder deck height. This provides a serious increase in power while still keeping the Engine in a reliable compression range. The kit will include longer studs. The water fitting holes will be tapped and I can provide the fittings if you know what size hose you will be using.
We also offer other services including fly-cutting the cylinder to bring the deck down to piston height for better combustion, porting, boring, and water jacketing the cylinder.

Thank You
Trevor. i sent an email to hill top honda.

Do you mean Hillside Honda?

I have the first head made by Trevor which is the three piece billet head.

Rand

yes sir it is hillside honda, how did you like your head?

I still like it a lot! It works well....almost too well. It's a little cold blooded until she warms up completely.

Rand

he will do a run of heads if he can get an order of 4 or more. i could use 2

hillsidehonda@att.net

2 down two to go!

Rand

I talked to him also I am in for 1. I thought about putting a order in for 4 then sell 3 lol.

Is it different than this one? any worse or better? I possibly might be interested in one.

http://www.ebay.com/itm/HONDA-ODYSSEY-F ... 98?vxp=mtr

Here is what the Hillside Honda head looks like. Like I said, I have s/n #1 and this picture is of a former member's head that he had anodized red S/n #2.

Note they do not come from Hillside Honda anodized.

Also note they don't come with the water jacketed cylinder either.

Rand

So you like youres rand ?

Very much so, works great. Make the Engine a little cold blooded though.

Rand

If I rember it costs $90 to anadize the head?

Or anodize parts yourself...

http://www.uponone.com/howtos/1.pdf

Is he still taking orders?

yes i emailed him last week and he is still waiting for 2 more orders to start production. here is the email adress



hillsidehonda@att.net