Hello to all,
I have for sale my 1989 Pilot frame with roll cage and down tubes.
In 2013 my son in law flipped this pilot, the main damage was done to the roll cage. I have looked the lower frame over and the only damage I can find is a dent on the left rear top corner, the right top is just scratched up. I have replaced the roll cage and down tubes, they are all straight. The roll cage has had tabs welded on for a heat shield. When I put the roll cage and down tubes on the lower frame they all went together with no trouble what so ever. The front lower frame has been strengthened, it was this way when I bought it.

$1200.00 no fees on payment. Shipping is the buyers responsibility, I will help in any way I can. I am going out to California in March, if it is along my route I could deliver for no extra charge.

I do have a clear NM title in my name.

One more thing,
For members here, if you contact me through here for anything I have listed on ebay I will end the auction and sell to you through here for 8% less then on ebay, 8% off shipping as well if here in the lower 48 states. If you send payment without fees to me you can deduct another 3.5% for a total of 11.5% off. Here is a link to my parts.
http://www.ebay.com/sch/sscs0407/m.html ... 7675.l2562
Shipping prices are for here in the lower 48 states only, I will ship outside the USA but I would need to get a shipping quote for you.

Please PM me if you are interested.

Thank you.

More pictures, if anyone would like more pictures please let me know.

Thank you.

Rumpa Bump Bump...

Looks like a few of your nuts are red .












2 min soak in brake cleaner will make them like new in case anybody is wondering

I have been getting kicked a lot lately.

You recognize any of the locations in the Better Call Saul series?

I have not watched it yet.

They have a breaking bad tour here now LOL, they drive people around in the motor (( Internal Combustion Engine ? )) home (I think) from the series going to the different locations the show was shot at.
I see it go by my shop all the time.

Ok, guys newbie to this fourm, but a newbie to Sand, Dirt and everything fast...... So my question is, been looking for a pair of fl350's or 400's. Is there enough parts out there to build this up from the frame up, or which I know the answer to this... but cheaper to build it up from the frame.... I know dumb question, but have to ask>>>

The parts are still out there if you have the patience

But unless you have plenty of time, a secret connection to a hoarde of parts, or more money than brains, trying to build one from the ground up is going to be frustrating and expensive

For example, people are asking over $500 for the steering wheel, over 2K for fenders/plastics, close to a grand for axles, etc.

If you've got that money, I'll start sending you parts as we speak :)

I agree completely, it will cost easily twice as much to piece a pilot together as it will to buy one.
This frame is good for someone who has crashed there pilot and needs a good frame.
You can get a pilot for $4 or $5,000.00 but you have to be careful most have been beat and not maintained properly, the best thing to do is be patient, you will still pay $6 or $7,000.00 for a nice clean one (unless you get lucky) but that extra couple of thousand for a real nice pilot will be money very well spent in the long run.

The hard part is finding that nice clean pilot.

Contact Nick Pena (socalgi) 1-661-312-2765, I think he maybe able to help you out.

Good luck, if you have questions post them up lots of good knowledgeable honest people on here.

Bump, I have this + many pilot parts for sale.

Thank you.

Steve, have you installed any suspension arms on the front end, everything fits perfectly?
The floor tub slides into the frame with those added tubes as well? Please check your PMS