needed

two tie rods
the left and right "wind scoops" that bolt up behind the seat


possibly needed.. but not sure yet

CDI (Capacitor Discharge Ignition) unit, coil, and regulator... havent been tested yet.

i got a new CDI (Capacitor Discharge Ignition) if you need one.....

I have the aftermarket tie rod kit, its used but heims are still good and rods are perfect. I have this kit on my FL350 and wouldn't go back to the stock tie rods, 55.00. I also have the air scoops, 15.00. I have 2 stock tie rods as well. Let me know if you need the CDI (Capacitor Discharge Ignition), coil and regulator, I have that too...Marc

Ok! my CDI (Capacitor Discharge Ignition), reg, and coil weren't effected by the previous owners short.

how much for the stock rods?
and i would like you to hold the scoops in my name as i will purchase them from you when i get cash

after going through the machine today i also need

1. the switch that screws into the tranny
2. a new relay solenoid
3. Nerf bars
4. Front right headlight
5. Right mirror

Good to hear the other parts werent affected. Well I just took a looksey and found that one of my stock tie rods was broke then welded, the other is ok though. If you still want them let me know and Ill send you a pic of the repair. If you still want a transmission switch after reading the following thread let me know. http://pilotodyssey.com/PO/viewtopi ... ion+switch . I have a good working starter relay/soloniod. I can make you a deal on the air scoops and relay for 40.00 plus shipping. Thanks...Marc. O you edited, I don't have the nerf bars, headlight or mirror :(

I really only need one tie rod actually so that would work out fine... let me know the pricing with the tie rod included in that... for some reason i have a funny feeling the relay is fine... ive just been working on it so long today i start to think a little fuzzy i will know for sure soon though. Scoops and Tie rod are a must though.

Thanks,

Tim

Time to put up the wrenches when eyes start to get fuzy . 15.00 for tie rod. Cosmetically one of the air scoops is a 4 out of 10 an the other one is a 7 out of 10 but they will get the job done...Let me know if you need pics of anything...Thanks Tim....Marc

sounds good.. when i get some cash ill hit you up right away

Ok sounds good...Marc

Hey Tim thanks for buying my parts. I would rather sell parts to you guys on this board then to make Evilbay any more richer, they get 10% of ATV parts.plus you never know what your getting on Evilbay. Sellers don't always disclose everything about thier stuff... let me know if I can get anything else for ya...Marc

Amen to that. Everything you sent looks great. Thank you for organizing the bolts and nuts according to the part they belong :)

Yup no problem. Enjoy the wrenching and have a blast riding!