[quote="hoser"]Crank cases and crankshaft were boxed and shipped to
Speedchaser by UPS this morning he should get them tomorrow with his regular UPS delivery, sent you both the tracking number.
Here is a list of parts I will need to rebuild this Engine, I already sent you a list of parts I need to rebuild the other Pilot
Engine that came with the LT Pilot and you have sent some of the parts on that list,
don't confuse the two engines and the parts list. it might get confusing before were done
UPDATED 3/15/2012Right case oil seal 91201-402-015
sent 1Right crank case seal 91203-HE0-003
sent 2 got them from RandyLeft crank case seal 91204-HE0-003
sent 2 got them from RandyRight crank case bearing 91033-HE0-005
sent 1 nissan bearingLeft crank case bearing 91032-HE0-005
sent 1 SKF BRANDEngine gasket kit 061A0-HE0-000
Sent 1 Vesrah full kitReed cage gasket 14132-KAE-000
sent 2Need 2 Right case dowels 94301-10160 ((Order 4 or 6 of these if available))
sent 2Need 2 Crank case dowel pin 90701-HE0-000 ((Order 4 or 6 of these if available))
Ordered from SERVICENeed 2 Cylinder dowels 94301-12200 ((Order 4 or 6 of these if available))
NOT DISCONTINUEDSENDING 2 Need 4 BIG dowel pin for Engine mount plate 94301-14200 ((Order 4 or 6 of these if available))
Sent 491001-KA4-003 Bearing, Radial Ball
NOT DISCONTINUED SENDING 1 91201-148-003 Oil Seal
DISCONTINUEDNEW PART NUMBER 91201-965-000 SUPERCEEDS sending 190437-HE0-000 Washer, Plain
Ordered from SERVICE91002-HE0-004 Bearing, Radial Ball
91002-HEO-004, superceeded by 91002-HEO-003, which cross references to many models, all the way up to 2012 TRX250.Sending 1!
90441-706-000 Washer, Sealing
sent 1 90454-KA4-000 Washer
sent 1Full gasket kit.
sent 1 Vesrah set see above81mm piston kit
ordered from RCKY MTN WILL SHIP TO YOU DIRECT91003-HE0-003 Bearing, Connecting Rod Small End
Ordered from RCKY MTN with piston kit DIRECT ship to youAll the dowel pins were rusted in the cases I had to crush them then beat them out with a punch to remove.
The cylinder has enough wear rust and scaring it needs bored to the next bore size.
I will send a OEM FUEL FILTER and a SPEEDCHASER HEAD with this order. The parts not listed will be ordered tonight from SERVICE. I am awaiting still my bottom end bearings and seals from Randy STILL, as soon as they get here I will send them over to you.