I'm doing a bunch of work to my pilot now so I just decided to do anything that needs
To be done..my steering column/steering shaft have alot of slop in them..is anybody have any technics to fix that? Cause I looked at getting a bushing and I think all the wear is in the shaft cause there is about 1/16inch indent along the bottom end of the shaft..what should I do?

i was looking at getting the pilot steering bushing on ebay. is there an old bushing that needs to be taken out or does it just slide in?

i read through all of it...do i need to take an old bushing out?

If you are replacing the bushing then the old one needs to be removed. It's a press in fit. Should be able to tap it out.

On my fl250, years ago, I built up the worn area with my mig welder then had it turned to the original diameter.

Anyone know if speed ever made a replacement bushing? I would rather deal with speed then the eBay guy.