Looks someone has started making these - cool. He has three options for the bushing.

Looks like its the same guy selling the rear ball joint.

Anyone know who it is? Anyone here?

http://www.ebay.com/itm/Honda-pilot-fl4 ... 19d018e0ef" ."..

I see his ebay name is pilotrooky - no member named pilotrooky here.

Looks like Rooky that use to be a member here and was booted to the darkside.

If people need a new bushing its time for Speedchaser to start making them out of derlin and making them longer than the OEM so the new bushing rides on part of the steering shaft that is not worn, we had a big long discussion about these bushings about 10+ years ago Moskito made a few longer bushings for Stoneman so he could continue to use his worn steering shaft, I made a longer one out of steel for my Pilot when it wears out I will try making one out of derlin .

I think stock for the fl350 is 22mm long 18mm id 24mm od with a 27mm od x 3mm flange


McMaster Carr has one close but the flange od is 30mm instead of 27mm

6659K39 Metric SAE 841 Bronze Flanged Sleeve Bearing for 18 mm Shaft Diameter, 24 mm OD, 22 mm Length

http://www.mcmaster.com/#catalog/118/1128/=h7dcsc" .".." ."..

here is my print for the fl350

is the fl400 the same ?

SpeedChaser

I have a new OEM Pilot bushing in my spare parts box I will measure it up and post later.





Fl400 & Fl350 steering bushing Print 53215-950-000 viewtopic.php?f=35&t=9975&start=0

Speedchaser ever make any of these?

I could do with one if speed managed to make some

id be interested in an FL350 or two bushign and a pilot bushing. cant ever hurt to keep a few spares in the parts pile!