PilotOdyssey.com http://www.pilotodyssey.com/PO/ |
|
Fl400 & Fl350 steering bushing Print 53215-950-000 http://www.pilotodyssey.com/PO/viewtopic.php?f=46&t=9975 |
Page 1 of 1 |
Author: | speedchaser [ Sat Apr 21, 2012 1:53 pm ] |
Post subject: | Fl400 & Fl350 steering bushing Print 53215-950-000 |
Part # 53215-950-000 stock for the fl350 is 22mm long 18mm id 24mm od with a 27mm od x 3mm flange and it rubber McMaster Carr has one close but the flange od is 30mm instead of 27mm 6659K39 Metric SAE 841 Bronze Flanged Sleeve Bearing for 18 mm Shaft Diameter, 24 mm OD, 22 mm Length http://www.mcmaster.com/#catalog/118/1128/=h7dcsc" .".." .".. here is my print for the fl350 I used one top and one bottom SpeedChaser |
Author: | mudbogger [ Sun Apr 22, 2012 3:32 pm ] |
Post subject: | Re: fl350 steering bushing Print |
Speed, did you make some of these for sale? I have the PPE all apart and might as well change mine out right now! |
Author: | bullnerd [ Sun Apr 22, 2012 3:35 pm ] |
Post subject: | Re: fl350 steering bushing Print |
So why not just use the MCmaster one? The flange doesnt matter does it? |
Author: | hoser [ Sun Apr 22, 2012 4:09 pm ] | ||
Post subject: | Re: fl350 steering bushing Print | ||
I recycled Speedchasers drawing here is the Pilot lower steering bushing, I have 3 of these one in the package two out of the package. Honda part number 53215-950-000 Bush, Steering Shaft Attachment: FL400 bushing steering Model (1).jpg [ 26.57 KiB | Viewed 6705 times ] Number 3 on parts diagram Here is some older thoughts on the steering bushing http://www.pilotodyssey.com/steeringbushing.htm
|
Author: | speedchaser [ Sun Apr 22, 2012 5:33 pm ] | ||
Post subject: | Re: fl350 steering bushing Print | ||
bullnerd wrote: So why not just use the MCmaster one? The flange doesnt matter does it? you can if the flange is in the way grind it down I think it will hit #22 on the fl350 I use bushing on both ends of my steering and got rid of the rubber bushing by the wheel speed
|
Author: | hoser [ Sun May 13, 2012 12:02 pm ] |
Post subject: | Re: Fl400 & Fl350 steering bushing Print 53215-950-000 |
I assume the rubber bushings was used for vibration or to reduce any vibration that might get to the yoke, a reduce driver fatigue thing? |
Author: | techman9188 [ Wed Oct 10, 2012 1:05 pm ] |
Post subject: | Re: Fl400 & Fl350 steering bushing Print 53215-950-000 |
I'd like 2 of these if anyone would like to part with one... or if you're interested in making me a couple. I'll call you later. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |