I am looking for the gaskets for the Pilot trans. I know they are in the Vesrah kit but it is currently backordered and I thought someone might have the OEM gaskets in their extra parts.
The part numbers are
21195-HE0-000
GASKET, REDUCTION CASE
21195-HE0-010
GASKET, REDUCTION CASE
21195-HE0-P00
GASKET, REDUCTION CASE
21198-HE0-010
GASKET, R. REDUCTION COVER
21198-HE0-000
GASKET, R. REDUCTION COVER
21198-HE0-P00
GASKET, R. REDUCTION COVER
061C1-HE0-000
GASKET KIT, REDUCTION

None of these guys have them in stock?
http://www.powersportparts.net/Vesrah_C ... 177102.htm

https://www.google.com/search?q=vg1097m ... =firefox-a

I made my own,just get the thickness correct to maintain case to case distance.
I think .5-.6mm? Measure with micrometer.
Otherwise you compromise the lateral thrust backlash.
Pair of scissors,pencil,and hole punch,easy peasy.

I was looking for the pilot not the 350.

I should not say this out loud but my wife sucks at that and with my eyesight so bad who knows what it would look like if I did it.

Not sure how I screwed that one up but I did here I fixed the links try again viewtopic.php?f=37&t=9707&p=121606#p121606

Thanks I did not know about HyperParts.com the place I was trying to get one from was in Canada. I will try to call them tomorrow.

I will use Athena if I cant get anything else but I have not had good luck in the past with their gaskets.

What kind of problems you have with Athenas, installation probs or long term issues? BTW Randy is checking on the trans gaskets

They show them in stock

http://www.partsbuggy.com/wc.dll?ctwp~i ... 2~602-1343" .".." ."..

vesrah part number 602-1343

They have at least 5 in stock - order while you can. 866-236-4793

Powersport Superstore sold through Amazon always have excellent prices http://www.amazon.com/Athena-P400210850 ... B000TYNGKS

I used to work for a shop and they always tried to save a buck on parts. I built a lot of high powered Yamaha Banshee engines. I've had quite a few vehicles came back because they had developed leaks in base and clutch gaskets on the Athena's. Plus they always stuck out just that little bit which annoys me. We ended up not using them anymore on the Banshee's at the shop and just stuck with OEM. I do not know what the fitment looks like for the Pilot gaskets from Athena but I know that I have heard other people complain. I would rather use OEM if I can but beggars cant be choosers. :)

Thanks for all of your help guys.

I have use quite a few of the Athena's on Pilot engines they stick out more than others and the material they use is the farthest from being OEM than all the others, the material is harder and ore brittle than all others, performance wise I cant comment but time will tell if we start having more leaks or blow outs.

Cant beat OEM really kicking myself for not buying 20 OEM sets when I could still get them.