I just picked up 3 350 so I'm going to part all three of them out I have most parts and tons of Engine parts I'm going to keep the axles and fenders.

Do you have a good transmission ?

Yes sir two of them.lets say $200 I'll get pictures of everything today

Got any decent complete cranks with rods? One of mine is all galled-up & pitted at the oil seal surfaces, hence its junk. I'd be interested in (2) if you've got 'em. I've got enough bottom end parts otherwise.

Any spare trans parts? Input shaft would be on my list of "spares to have".

Dan A.

Yes I have a total of four engines I need to look at them to make sure the bottom ends are ok I do have some other parts I'm not sure about trans parts but I still have one tranny left if the other one sells

Are the driven clutches any good? I would be interested in one.

Some pictures

Yes Bob I have three of them let me go through them and see which one is in the best condition

I need a gear shift change arm off the top of the trans if you are willing to separate it. I am referring to the fourth pick above where the cables attach to the trans. Thanks

I'm in the market for a good foot tub, the two side pieces that cover the lower steering, and a left front fender?

Hey guys i just got home from the river for the 4th. Ill start tearing into them this week and get pictures of the parts you guys want. I bought them for the axles and one trans. Ill sell for half what feebay has

I am in need of the following;

Mag Seal, PTO Seal, and Balance Cover Seal,

Currently rebuilding my Engine,,,

For those you are going to want new seals.

Here's one place you can get them.

http://oddatv.com/product/honda-fl50-od ... l-set-new/

Rand

Would definitley be interested in plastics if they are any good. Would you happen to have a shift assembly? Shifter, and cables? Also looking for an ebrake and cables. And possibly many more parts.

What is wrong with the one in the middle? Looks to be in good shape.

The one in the middle just needs a top end. ill sell it for 1500 with the new piston and jug

I have them all . we'll be tearing into them sunday

I am interested in those parts send me a message. I am putting my odyssey radiator and water pump in this weekend and figuring out if i'll need more parts.

Anything more on this?

Still wondering about cranks and bottom ends.


Thanks,

Dan