I like that tres hombres!
We better not go to Arizona anytime soon...
Redskinman and Rkinman came out to a little place in Texas called Mudbuddy's! Gearge showed up first and the first thing I wanted to check were his brakes! LOL Last time I rode with the Rkinman his failed him and he ran me over lol!!!
No Brake Fluid in the master, and just enough of the rear had fluid in it to stop in the parking lot but not much else! I showed George how the brakes were adjusted and we filled and bled the brakes...
I will give credit where credit is due...
If it were not for Hoser's site here I would have never been able to Help george out! I am no mechanical genius, and only shared what I have learned here on this site!
After we got the brakes worked out He drove it for a while just to check them out! He returned and asked me to take a ride to get a feel of the
motor ((
Internal Combustion Engine ? )) and jetting! This was the next thing I wanted to show him how to do! I showed him how to do the plug chop, and he has the jetting right on! Good color throttle response is great!
Next issue we worked on was getting his tie rods and toe adjusted not properly but "eyeballed it"! It turns a lot better than before, and when he gets a new left thread nut he will get it tuned in better!
The next thing I think he should do is put in some kind of fan setup for the fins... Here in Texas most of the trails available are tight and very few straight a ways to let air flow over the jug!
Raymond and Crew showed up in fine style at just about the time we got George lined up, but Raymond got to do the Daddy Thing an did it WELL!!! My Hat's off to him!!! He had his Hands full with some Darling kids who were not scared of tackleing the biggest hills on there little quads!!! Some future Champions in the bunch! His youngest Daughter was even getting bigger AIR than he and I did lol
I am looking forward to the next time we ride, maybe somewhere near Houston!
1frc you were surely missed buddy!