Need a set of the rubber pieces that the battery box pins slide into.
I looked on service honda site and Im not sure the item numbers match whats on the illustration.
#25 (Pad, Fr. Cross Pipe )looks to be what I need but the description doesnt match it.
wtf?
http://www.servicehonda.com/hard%20part ... 20page.htm

Anyone else?

Stoneman, you speaking of the 2 rubber grommets that go into the plate that attaches to the frame-then the battery box studs on the bottom of the box slides into them? If so they are the same grommets that hold the rad into the frame as well, you can order them that way as well.

YES
OK

FYI
Ref #27 83618-323-000 Rubber, Battery Box
The above item/part # from Service Hondas site is NOT the rubber that mounts into the battery tray.
It is NOT the rubber that the battery box pins slide into.

Ref# 25 71905-HE0-000 Pad, Fr. Cross Pipe
This appears to be the correct rubber but its discontinued.
Anyone have a old/new spare one or another source?

You want (2) of # 83618-323-000 inside the box

or (2) of # 80201-MJ8-000 for the box pins to slide into

I ordered some a couple of years ago.

The reference number on Service's fiche is right, but the listing page is wrong

Try this site:

http://www.hondapartshouse.net/pages/pa ... fault.aspx

It can't be 24 since both fiche's state only (1) is required

Service Honda Page for that has been wrong for some time, Ody Stable is correct. When you order from them off there fiches double check, they have never updated them for several months.