I'm looking for Honda Engine seals. The P/N's are 91201-VMO-003 and 91203-VMO-004. If anyone could help me with these I'd appreciate it.

Document your findings here please viewforum.php?f=39

I already started threads for each seal so we could document replacements/solutions.

Can you do me a favor and order 2 of each seal when you order them I will buy one of each from you and even split shipping cost heck if they are cheap enough I will buy two of each.

Thanks.

I will definately do that. I found one single seal on eBay so far. I want to find a few of each as well future projects. I'll order plenty when I find them. When doing a google search on the seal sizes some come up. Will these work?

Post a link to the seals in question here please, this will be a good time to figure this all out.

Original seal 91201-VMO-003 oil seal 30x50x7
Look at this on eBay:

Oil Seal Engine motor (( Internal Combustion Engine ? )) New TCM Size 30X50X7 TC 11662

http://bit.ly/HgkPBj

I just typed 30x50x7 seal in the eBay search. Several choices show up.

Go here http://www.cheapcycleparts.com/products ... al-30x50x7

Its says 91201-VM0-003 This part has been replaced by: OIL SEAL (30X50X7) 91201-VM0-004 Honda OIL SEAL (30X50X7) Your Price: $8.06

Anybody tried to order this seal with the new part number? 91201-VM0-004

Check this out from Honda must have some for another application looks like a power equipment dealer
http://www.norwalkpower.net/store/pc/Ho ... 474896.htm

Another Honda application http://www.cmsnl.com/products/seal-dust ... 252mae003/

Fits a Honda boat too? http://www.boats.net/parts/detail/honda ... F-801.html

And look at this Purchase this Honda 91201-VM0-003 OIL SEAL (30X50X7) --- OIL SEAL (30X50X7) (ARAI) (Honda Motorcycle Code 1787118)

http://www.powersportsplus.com/parts/de ... 0-003.html
.....................................

This one if its a actual pic looks german has to be better quality?
http://www.ultimategarage.com/shop/part ... ts_id=2787

Input Shaft Seal (30x50x7) - fits the following models....

* 318i/318ti/323i/325i (E36)
* 323i/325i (E46)
* 525i (92-93)(E34)
* 525i (01-03)(E39)
* 525i (06-07)(E60)
* Z3 (96-02)(with 1.9 & 2.5)
* Z4 (03-08)(with 2.5 & 3.0)
..............................................

So cheap it has no picture?
http://www.mfgsupply.com/501563.html


.................................................

Chery automobile?
CHERY AUTOMOBILE OIL SEAL-CAMSHAFT 30x50x7 Part number ---> 481F-1006020
http://cherylist.com/CHERY-QQ6-OIL-SEAL ... 92043.aspx

...................................................
Confused yet this is all just for the one seal, lets try to get one from HONDA heck with them ebay mutts selling stuff of unknown quality and brand name.

Ok lets look at the next one part number FL350 Mag Side Crank Seal 91202-VM0-003 25X40X8

Honda marine ?
91255-ZV4-004 SEAL (25X40X8) (Honda Code 2801017)
http://www.boats.net/parts/detail/honda ... 4-004.html

Honda power equipment? Honda 91255-ZV4-004 SEAL (25X40X8) 001
http://www.norwalkpower.net/store/pc/Ho ... 475126.htm

Here is the 3rd seal FL350 Clutch Side Crank Seal 91203-VM0-004 45X62X8

Check out this site http://www.diyspareparts.com/parts/hond ... 2-km4-003/
Ues their search feature.


Honda OIL SEAL 45X62X6 - 91202-KM4-003
Part Number: 91202-KM4-003, 91202KM4003



..............................

This site has some chatter about this seal http://www.ns400r.co.uk/forum/viewtopic.php?t=1749&

Agreed, confusing for sure. I'm gonna track down the original seals. I'll order some of these sometime and compare them side by side.

Honda P/N 91201-VMO-003 oil seal 30x50x7 was replaced by P/N 91201-VMO-004.
I ordered 2 of P/N 91201-VMO-004 today.

Honda P/N 91202-VMO-003 oil seal 25x40x8
I ordered 2 of these today as well.

Sorry I havn't put any info to the tech section yet. I want to wait until the seals are delivered and we're positive they're right before I clutter that section. I'll edit this post with my info on the 3rd seal.

Good thinking that saves me from having to go back and delete all the bad info lol and its why I post the info I found here, once we have them can filter out the crap and only post the known good info then reference this thread in case that info goes bad

You order them local or online?

Thanks.

I ordered them online at cheapcycleparts.com. I didn't even think to go to the local dealer. Obviously now that i think about it they should be able to get them since those 2 are available. On the clutch side crank seal 91203-VMO-004 (45x62x8). 91202-KM4-003 (45x62x8) center seals from NS400r seem to be the proper size just without the rubber lip that goes against the outside of the crank case??? Sound right to you?

The following info was copied off another website. Could this possibly be the original supplier of these seals?


I have found the factory that makes the inner seals German Co. with the NOK label (Freudenberg-NOK)

http://www.freudenberg.com/ecomaXL/inde" .".. ... s_fds_fngp

They have none in stock but can be made!?!

I have one of each, 91202-VM0-003 and 91203-VM0-004. Let me know if you still need them

I do. PM sent

I'm still looking for OEM Engine seals.
P/N's
91201-VMO-003
91202-VMO-003
91203-VMO-004

Thanks

91201-VMO-003 goes to -004 and is available from American Honda and can be ordered through any Honda M/C dealer.

91202-VMO-003 is available from American Honda and can be ordered through any Honda M/C dealer.

91203-VMO-004 is available from Canadian Honda and can be ordered through any Canadian Honda M/C dealer.

Thank you sir, I was aware of the first 2 being available but not the 3rd. Always looking for a deal. Never hurts to ask. How can I order from Honda of Canada? Thanks

You can't order from Honda of Canada, but you can google on Honda M/C dealers in Canada. Contact them to order for you. Others on here have done that.